Page 2
ADDITIONAL INFORMATION FOR TV'S SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced.In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained.Replacement fuse covers can be...
REMOTE CONTROL & TV CONNECTIONS LOCAL CONTROL Front Side MAIN POWER button PROGRAM UP/DOWN buttons VOLUME UP/DOWN buttons TV / AV button STAND-BY indicator Rear SCART 1 socket SCART 2 socket AERIAL jack REMOTE CONTROL UNIT TV mode POWER SOUND MUTE NUMBER 0..9 SLEEP TV / AV...
IMPO RT A N T SA FEG U A RD S WATER AND MOISTURE Never install the set in the following places: In a wet basement, bathroom. Do not place any container with liquid on the set. Do not expose the set to dripping or splashing water. HEAT Never place the set near heat sources.
ST A RT U P LANGUAGE MENU The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus.
SWITCHING ON TV SET 1) If stand-by indicator (B5) is red, then the TV set is in stand-by mode. You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons (B2) can also be used.