Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Daewoo DWP-28W2D, DWP-28W2KD, DWP-28W2GBD, DWP-28W2FD, DWP-28W2SD, DWP-28W2, DWP-28W2K, DWP-28W2GB, DWP-28W2F, DWP-28W2S
Summary of Contents for Daewoo DWP-28W2D, DWP-28W2KD, DWP-28W2GBD, DWP-28W2FD, DWP-28W2SD, DWP-28W2, DWP-28W2K, DWP-28W2GB, DWP-28W2F, DWP-28W2S
-
Page 1: Colour Television
Colour Television Instruction Manual MODEL NO. : DWP-28W2D, DWP-28W2KD, DWP-28W2GBD DWP-28W2FD, DWP-28W2SD DWP-28W2, DWP-28W2K, DWP-28W2GB DWP-28W2F, DWP-28W2S Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. - Page 2 ADDITIONAL INFORMATION FOR THE SET SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362.
-
Page 3: Table Of Contents
CONTENT Important safeguards...3 Before Powering up...4 Identity of features on local and remote control...5 Connecting external equipment...7 Daily use...9 Menu...11 Teletext...19... -
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS WATER AND MOISTURE Never install the set in the following places: In a wet basement, bathroom. Do not place any container with liquid on the set. HEAT Never place the set near heat sources. VENTILATION Do not cover the air vents in the cabinet and never place the set in a confined space such as bookcase or built-in furniture unless proper ventilation is provided. -
Page 5: Before Powering Up
BEFORE POWERING UP INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT Insert the batteries (two 1,5V, type AAA) MAINS CONNECTION Plug the mains cable into the power socket with 240v / 50Hz AC. AERIAL CONNECTION When using an outdoor aerial, it is usually connected to the set by means of 75 ohm lead, terminated with a coaxial plug. -
Page 6: Identity Of Features On Local And Remote Control
IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL LOCAL CONTROL Front ON/OFF MAIN REMOTE POWER SENSOR BUTTON Back AERIAL TERMINAL SCART SOCKET1 SCART SOCKET2 TV / AV DOWN/UP BUTTON BUTTONS STAND-BY INDICATOR PROGRAMME VOLUME DOWN/UP BUTTONS VIDEO L AUDIO R VIDEO AUDIO HEAD... -
Page 7: Remote Control Unit
REMOTE CONTROL UNIT TV mode 1 POWER 2 NUMBER 0-9 3 NORMAL / OK 4 TV / AV 5 PR UP (CURSOR UP) 6 VOLUME UP (CURSOR RIGHT) 7 MENU 8 PR DOWN (CURSOR DOWN) 9 VOLUME DOWN (CURSOR LEFT) 10 MUTE 11 RECALL 12 SLEEP... -
Page 8: Connecting External Equipment
CONNECTING THE EXTERNAL EQUIPMENT TV and AV Use the TV / AV button ( ) on the remote control unit or on the front of the set to select one of the three options. Whenever the TV / AV button ( changed as shown: AV1 SCART JACK 1 (AV1) : This is used to connect a VCR,... - Page 9 CAMCORDER FRONT AV JACK Connect the AV (Audio/Video) socket with an appropriate cable to the corresponding socket of the external equipment . Select AV mode by pressing the TV / AV button. Press the TV / AV button to return to the TV mode . NOTE : If two pieces of equipment are connected, one to the front AV JACK and a second to the SCART JACK 2, you can play only one apparatus, the second one must be switched off.
-
Page 10: Daily Use
DAILY USE Direct selection Use remote control NUMBER buttons. For two digit programme numbers, press the button for the second digit within 2.5 seconds. Mono forcing If you are unable to get good sound on a channel due to a poor stereo broadcasting signal, you can change from stereo to mono transmission by pressing the remote control MODE button. - Page 11 Volume adjustment Use VOLUME UP/DOWN buttons on the remote control unit or on the front of the set. The remaining time before TV turn-off is displayed on programme status. Mute Turn the sound off by pressing the remote control MUTE ( Then the logo ( Sound returns by pressing the same button once more.
-
Page 12: Menu
MENUS All menus are removed within 25 seconds if you don’t press any button. Direct selection - Press remote control MENU button to display main menu. Then, you have the choice between several sub-menus . MENU - Select the function you want to change using remote control CURSORS UP or DOWN buttons. - Page 13 If you want to cancel immediately the main menu, press MENU button once more. - To select one of the sub-menus, use remote control CURSORS buttons UP, DOWN, LEFT, RIGHT. - To enter the selected sub-menu, press remote control OK button . - Confirm (if needed) by pressing remote control OK button .
- Page 14 MENUS 2. Child lock prevents the use of the TV set without remote control unit. 3. TV clock setting - Note that if you turn off the set with the MAIN POWER button, the clock setting is lost and must be reset if necessary. The clock is set automatically if programme NO.
- Page 15 1. Select the menu language. 2. Child lock Select this value ON or OFF: - When switched ON: the stand-by indicator will flash red and green, child 00 : 00 lock is operating. - The set can only be switched ON with the remote control unit. 3.
- Page 16 MENUS Automatic Tuning and Sorting System - Select "ATSS" function. - Select required country. - Note for satellite receiver users : Before starting ATSS, connect your equipment to the TV set, or via the VCR, turn it ON and tune in SKY NEWS. This menu shows the programme position assignment, you can change the programme position according to your personal preference.
- Page 17 Choose starting point Select the "Program" function and then the programme which you want to start manual tuning. Then, the channel number, the frequency, If you don’t know the frequency or channel number then refer to channel searching section. The name and the programme number of this programme are displayed in the install menu.
-
Page 18: Teletext
TELETEXT 1- SWITCHING TELETEXT ON/OFF - Select the channel which is broadcasting the teletext programme you want to watch - Press the remote control TELETEXT ( The overview station page or the last page viewed (If you watched teletext on this channel previously) appears. - Page 19 4- TELETEXT FORMAT, PICTURE, SOUND CONTROL Doubling character size Repeatedly pressing the SIZE ( Upper half of the page > Lower half of the page > Return to normal size. Volume and brightness control in teletext mode Pressing the MENU button in teletext mode, the volume and brightness control menu will be displayed at the bottom of the screen.