Technical Specifications - Sencor SWK 1031SS User Manual

Electric Kettle
SWK 1031SS
In case you accidentally turn on the kettle without water, the thermoregulator automatically
cuts off the electric circuit once it has reached a certain temperature and the light control turns
off. After several minutes, once the stainless-steel bottom has cooled, it is possible to use to
kettle again.
Cleaning the kettle and filter
The removable filter serves to hold back limestone and prevents it from getting into the cup
when water is being poured. It is necessary to clean the filter under running water on a regular
basis.
Remove limestone scales on a regular basis, at least 1 x month.
To remove limestone scales, you can use:
- 8 % white vinegar, readily available in shops. Fill the kettle with % | of vinegar and let it stand
for 2 hours. Then empty the kettle and boil clean water 4-5 times prior to use.
- citric acid. Boil % | of water in the kettle, add 30 g of citric acid and let it stand for 30 minutes.
Then empty the kettle and boil clean water 4-5 times prior to use.
To clean the exterior part of the kettle use a dry cloth or a cloth dampened in a weak solution
of neutral dish liquid.
To clean the stand, only use a dry cloth.
To clean the kettle, its components or accessories, never use cleaning agents that cause scratch-
es, gas, thinners, etc.
Technical specifications
230 V ~ 50 Hz, 2000 W
Volume 1 |
Copyright © 2013, Fast CR, a.s. Revision 04/2013