Sencor SWK 1031SS User Manual page 5

Electric Kettle
SWK 1031SS
Description of kettle
— Spout with removable filter inside
— Lockable lid
Switch (1) - On/Off
— Indication switching ligth
— Stand with central connector
moUn
I
Operation of kettle
Prior to use, remove all packaging material from the kettle. Set the required length of the electric
cable. Press the electric cable into the groove in the stand.
Place the stand on a stable, flat and dry surface.
Fill the kettle with the required amount of water. You can fill the kettle by the spout, or by open-
ing the lid. The water must cover the guideline minimum and must not exceed the guideline
maximum.
Warning! In case the kettle is overfilled, this can lead to the spurting of boiling water.
Place the kettle on the detachable stand.
Insert the plug into the electric socket.
To turn the kettle on press switch with the symbol O) down. Note: Prior to turning it on, make
sure the lid is well shut.
As soon as the water is boiled, the kettle will be turned off automatically.
Prior to removing the kettle from the stand, make sure it has been automatically turned off first.
In case it is not automatically turned off, turn it off manually.
After use, remove the electric cable from power point and let the kettle cool.
Never fill the kettle while placed on the removable stand.
Do not turn on the kettle and use it without water. Incorrect use may adversely affect the opera-
tion life of the appliance.
Copyright © 2013, Fast ČR, a.s. Revision 04/2013