Silvercrest SGWZ 1 A2 Safety Instruction page 10

The power adaptor consumes a
small amount of energy as long as
it is connected to a socket-outlet.
In order to switch off the power
adaptor completely, it must be
disconnected from the socket-outlet.
The socket-outlet must remain freely
accessible at all times.
Installation location and
operating environment
m ATTENTION! Risk of
property damage!
Do not place burning candles or
other open fire on or next to the
product.
10 GB
Sudden temperature changes
may cause condensation inside
the product. In this case, allow the
product to acclimate for some time
before using it again to prevent
short circuits!
Do not operate the product near
heat sources, e.g. radiators or
other devices emitting heat!
The Gateway must not be operated
near sources of high-frequency or
magnetic interference.
Do not expose the product to direct
sunlight.
Observe the ambient conditions
described in the technical data
(see "Technical data" in the quick
start guide).