Page 1
Airzone Blueface Thermostat with a 3,5'' touch screen User mode (Eco, Vacation, Stop, Operation mode Comfort, Unoccupied and Night) (Cool, Heat, Auto, Emergency Heat* and Dry*) Airflow/Fan speed Current Zone / Zone Navigation Menu Current Room Temperature / Relative Humidity...
Page 2
Airzone Think Thermostat with a 2,7’’ Low-energy E-ink interface User Mode (Eco, Vacation, Stop, Comfort, Unoccupied and Night) Operation mode Airflow/Fan speed (Cool, Heat, Auto, Emergency Heat* and Dry*) Control bar Adjusts the set-point temperature by pressing or sliding or selects...
Page 3
It can be turned On by pressing the Led or from remote zones. If it is blinking quickly in red or purple there is an error. It can be consulted on the Blueface or at the Airzone Clud app. If the led is Off The zone is in energy saving mode.
Page 4
User´s Manual English Français Français Español...
TABLE OF CONTENTS Warnings and environmental policy ....................................4 Warnings ..............................................4 Environmental policy ...........................................4 Airzone Interfaces ............................................5 Airzone Blueface ............................................5 Airzone Think ............................................5 Airzone Lite ..............................................5 Blueface Thermostat ..........................................6 Main Screen Display ..........................................6 Screensaver ..............................................7 Basic Use of the Blueface Thermostat ....................................7 Adjusting the temperature ......................................7...
WARNINGS AND ENVIRONMENTAL POLICY WARNINGS For your security, and to protect the devices, follow these instructions: · Do not manipulate the system with wet or damp hands. · Disconnect the power supply before making any connections. · Take care not to cause a short circuit in any of the system connections. ENVIRONMENTAL POLICY Do not dispose of this equipment in the household waste.
AIRZONE INTERFACES Airzone thermostats control the air conditioning and boost the energy efficiency of the AC unit. Both main and zone thermostats can be easily configured. From the main thermostat you can select the available operation modes, define the user mode or select the airflow control of the unit.
BLUEFACE THERMOSTAT MAIN SCREEN DISPLAY Operation mode Airflow/Fan speed User mode Current zone/ Zone Current Room navigation menu Temperature/ Relative humidity Current Set Point Zone demand On/Off Local ventilation Time schedule Zone settings programming User settings Operation Mode. Displays the current mode of temperature control: Cool, Heat, Auto and Emergency Heat (depending on the installation).
On/Off Time and Date. This information can be edited from the user settings menu. Weather Information. The screen will only display the weather information after setting the location of the Airzone VAF Cloud Webserver on the Airzonecloud app. Current Zone. Displays the current zone.
Operation Mode. To change the Operation Mode from the Home Screen, press the Operation Mode icon and select the desired operation mode: Cool. In this mode, the conditioning unit will start a cooling cycle any time that any zone is in cool demand (T <...
Local Ventilation This option enables the activation or deactivation of the ventilation in the selected zone when the system is not actively cooling or heating any of the zones. ADVANCED USE OF THE BLUEFACE THERMOSTAT Time Schedule Access the time schedules menu by pressing the time schedule icon. Press on the days to access to the available schedules. Name of the Confirm schedule...
Zone Navigation From the main screen press on the name of the zone, a list with all the zones and their status will be displayed. This screen enables the control of all the zones at the same time or individually, it is also possible to switch on/off the zones from this screen, press <...
Note: For security reasons, the zone will turn off after changing any setting. Lite Settings. To save energy, enables to configure the wired Airzone Lite to switch off after a few seconds. Note: To access the Lite settings, go to a zone controlled by a wired Lite thermostat through the zone navigation menu.
WARNINGS AND ERRORS Thermostat displays all the system warnings on the screensaver. If there is any error, it will be displayed on the screensaver, on the main screen and on “Errors”, in user settings. Warnings Unoccupied Override. A zone has been activated while the user mode is set on Unoccupied.
Timer. Automatically switches off the zone after 30, 60 or 90 minutes. On/Off. Turns On and Off the zone where the thermostat is located. Airzone. Button used to confirm, return to home screen and to switch between the heating set point and cooling set point.
Home screen Maximum/minimum temperature and weather information. The screen will only display the maximum/minimum temperature and the weather information after setting the location of the Airzone VAF Cloud Webserver on the Airzonecloud app. Zone Status. It displays information about the status of the zone: the state (on/off) and the user mode. In case of failure, it also displays all the errors.
Battery replacement The Airzone Think Thermostat will display a battery alert on its screen when the batteries are low. To replace the battery, please remove the thermostat from its back plate and then replace the battery (CR2450). Important: We recommend the use of top-brand batteries. Using low-quality batteries may reduce the duration of use.
Page 19
Stop. The air-conditioning system will remain switched off regardless of the demand status of any zone, all the motorized dampers will remain opened. Airflow control. This parameter is only available when the Think thermostat is configured as main of a zoned system, selects the control algorithm that best fits the installation.
WARNINGS AND ERRORS Thermostat displays all the system warnings on the screensaver. Warnings Unoccupied Override. A zone has been activated while the user mode is set on Unoccupied. The system will start using the Comfort Mode during the selected override time. When the override time has expired, the system returns to its previous status.
LITE THERMOSTAT On/Off Temperature setting: Temperature setting: raise temperature lower temperature On/Off. Turns On and Off the zone. In addition, it indicates the operation mode with color codes. Temperature Settings. Allows adjustment of the base set point temperature in increments of ± 1˚ C/2˚ F up to a limit of ± 3˚ C/6˚...
Battery replacement The Airzone Blueface Thermostat will display a battery alert on its screensaver when the battery of a Lite Thermostat is low. To know the zone of the Lite thermostat running out of battery, press on the warning icon.
Need help?
Do you have a question about the VAF and is the answer not in the manual?
Questions and answers