Boot Booster - Asus Eee PC 1005HAB User Manual

Eee pc 1005 series
Hide thumbs Also See for Eee PC 1005HAB:
Table of Contents

Advertisement

Boot Booster

The Boot Booster item in BIOS setup helps shorten your Eee PC bootup
time. However, you MUST disable this BIOS item before you change any
Eee PC components or perform system recovery (from USB flash disk,
external optical drive or hidden partition). Follow the instructions below
to disable Boot Booster:
Start the system and press <F2> on bootup to show the POST
1.
screen. Press <F2> again to enter the BIOS setup.
2.
Set Boot Booster to [Disabled]
If you fail to see the POST screen or enter the BIOS setup by doing
the instruction above, restart the system and try pressing <F2>
repeatedly on bootup.
Main
Boot Device Priority
Boot Settings Configuration
OnBoard LAN Boot ROM
Boot Booster
Press <F10> to save the configuration and restart Eee PC.
3.
Remember to enable Boot Booster after you complete hardware
change or system recovery.
4-6
Advanced
Security
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Chapter 4: Support DVD & System Recovery
BIOS SETUP UTILITY
Boot
Exit
[Enabled]
[Disabled]
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents