Table of Contents
Advertisement
Page 13
Transcend AUTO Sleep Apnea Therapy User Manual
Power connection jack and USB port
The power jack accepts the barrel plug of
the output cable from a DC power source to
operate the Transcend AUTO.
A variety of power sources may be used to
power the Transcend AUTO. An AC to DC
converting power supply is provided with
your device and should be used when
powering the device by line (wall outlet)
power.
An optional mobile power adapter connects
to a DC power outlet, such as that found in
an automobile, truck, RV, boat, or similar
vehicle.
Optional Transcend battery packs are also
available to power the Transcend AUTO.
USB port
A mini-AB USB port is provided for direct
data exchange between the Transcend
AUTO and a computer via a USB data cable.
USB port
This interface allows the clinician to
configure the Transcend AUTO for
prescription pressure, ramp settings and
Power jack
AUTO settings and provides access to
therapy compliance information that can be
viewed by the user and emailed to the
clinician.
Advertisement
Table of Contents
Need help?
Do you have a question about the TRANSCEND AUTO and is the answer not in the manual?