Advertisement
Quick Links
Advertisement
Related Manuals for RIX RNV-31
Summary of Contents for RIX RNV-31
- Page 1 RNV-31...
- Page 3 TABLE OF CONTENTS PRODUCT OVERVIEW PRODUCT PARAMETERS PACKING LIST PRODUCT APPEARANCE DEVICE MODES POWER SUPPLY EXTERNAL BATTERY POWER ON/OFF COMPARTMENT CONTROLS AND PRODUCT PRODUCT TROUBLE LEGAL AND REGULATORY INDICATORS MAINTENANCE SHOOTING INFORMATION...
- Page 4 (with in FOV) Side flip-up off The RNV-31 has an internal IR LED for operating when no ambient light is available. By switching the unit to BSP bright source protection the infrared (IR) mode, the IR LED produces an artificial light source that is invisible to the human eye but is Low battery indicator detected by the RNV-31.
- Page 5 PACKING LIST PRODUCT APPEARANCE IR illuminator Battery cap Potentiometer knob Regulating mechanism RNV-31 Device Thermal Fusion Long eyeshade Helmet Bracket(L4G24) Pendant Adapter (optional) Objective lens BSP bright source protection Eyepiece User manual Portable bag Battery pack(optional) Cables (optional)
- Page 6 Installation of Thermal Fusion Pendant Adapter (Achieve Fusion with J-C): DEVICE MODES 1. Secure the Thermal Fusion Pendant Adapter to the bottom of the objective lens with 2 M2x5 screws. Verify Helmet Mode the alignment, screw in the bolts, and tighten. 2.
- Page 7 》Please remove the battery if the device is not in use for long periods of time. battery compartment and RNV-31 with the cable. Turn on or off the power to the battery box, as shown in 》Don't power the device with a modified or damaged battery.
- Page 8 POWER ON/OFF POWER ON 3.When the battery compartment is powered 1. Turn clockwise, and when you hear a "click," turn on the power. on, it displays the power (green, blue, and 2. After power is applied, rotate the potentiometer gain adjuster. red prompts).
- Page 9 CONTROLS AND INDICATORS 》Flip function 》BSP bright source protection function Press the potentiometer knob three times consecutively (with no more than 1 second between presses). Press the potentiometer knob five times in a row (the interval between two times is not more than one second) ON: blue light blinks twice (500 ms/time).
- Page 10 PRODUCT MAINTENANCE NOTE 》The binocular night vision device is a precision optoelectronic instrument and must be handled with care. 》Do not scratch the outer surface of the lens or touch it with your fingers. 》Battery Level Detection 》Do not wipe the shield with wet lens paper or when the shield is wet, or the coating will be damaged. When the battery voltage falls below 1.15V, the red status indicator will blink.
- Page 11 PRODUCT TROUBLE SHOOTING LEGAL AND REGULATORY INFORMATION MALFUNCTION PROBABLE CAUSE/TEST/INSPECTION CORRECTIVE ACTION 1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.Check that batteries are installed in the correct (1) This device may not cause harmful interference. d i r e c t i o n a n d w h e t h e r t h e b a t t e r y p o w e r i s 1.Replace the battery or install the battery The device will not power...
- Page 12 Following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
- Page 13 YEAR WARRANTY Night Vision Devices...
Need help?
Do you have a question about the RNV-31 and is the answer not in the manual?
Questions and answers