Table of Contents
Advertisement
Quick Links
SERIES 7002-MT
TRUCK RACKS
(CANTILEVER STORAGE)
CAUTION
Inspect unit and all components
for any loosening that may have
occurred during shipping
ATTENTION
Review entire manual before
starting assembly
Mortech™ Manufacturing Co., Inc.
411 North Aerojet Avenue, Azusa, CA 91702
(626) 334-1471 www.mortechmfg.com
Technical Users' Manual
Installation and Operating Instructions
CAUTION
DO NOT USE CLEANERS
CONTAINING CHLORINE WHEN
CLEANING STAINLESS STEEL
ATTENTION
All images and Drawing in this manual
may not represent your model.
Refer to your particular project for
exact specifications
SEPTEMBER 2020
ISO Doc. #OM7002MT (REV. C)
Advertisement
Table of Contents
Related Manuals for MORTECH 7002-MT Series
Summary of Contents for MORTECH 7002-MT Series
- Page 1 All images and Drawing in this manual starting assembly may not represent your model. Refer to your particular project for exact specifications SEPTEMBER 2020 Mortech™ Manufacturing Co., Inc. 411 North Aerojet Avenue, Azusa, CA 91702 ISO Doc. #OM7002MT (REV. C) (626) 334-1471 www.mortechmfg.com...
-
Page 2: Safety Information
• Is unit draining properly? WARNING • Are all nuts, bolts, and pins secured in place? It is crucial that any work performed on Mortech If unit has an issue contact Mortech Manufacturing Inc. Manufacturing Inc. manufactured items are carried out... -
Page 3: Equipment Description
Equipment description Series 7002-MT Truck Racks QUICK RELEASE TRAY STRAP (TYP) CANTILEVER ARM (TYP) T3626HS S/S BODY TRAY (TYP) The cantilever truck rack is floor and wall mounted. • Nylon straps and secured buckles for Manufactured in stainless steel, these racks are designed for holding T3626-HS tray is place heavy-duty use with the following features and materials: •... - Page 4 2. WHEN MOUNTING THE RACK, 90º FLUSH IS NECESSARY AT THE BASE OF THE RACK. USE PROPER HARDWARE FOR INSTALLING AND MOUNTING THE RACK. MOUNTING AREA Mortech Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com SEPTEMBER 2020 MFGISO DOC. #OM7002MT (REV. C)
-
Page 5: Parts Listing
Parts listing Series 7002-MT Truck Racks MODEL T3626HS Designed for use with mortuary refrigerators, mortuary racks, dissecting tables and cadaver carriers. The Model T3626HS is a smoothly finished 18 gauge stainless steel body tray. • Fabricated with or without hand slots •... - Page 6 Parts listing Series 7002-MT Truck Racks MODEL T3624 Designed as an economical body storage tray for use with our Cadaver Storage System. STANDARD FEATURES • Size: 75.5 inches L x 23 inches W x .75 inch H • Laminated on top with protective coating on bottom •...
- Page 7 Parts listing Series 7002-MT Truck Racks SERIES 7002-MT TRUCK RACKS (CANTILEVER STORAGE) The cantilever truck rack is floor and wall mounted. Manufactured in stainless steel, these racks are designed for heavy-duty use. SEPTEMBER 2020 MFGISO DOC. #OM7002MT (REV. C)
-
Page 8: Operation
Operation Series 7002-MT Truck Racks QUICK RELEASE TRAY STRAP OPERATION BUCKLE RECEPTACLE, RELEASE BUTTON (RED) TO TIGHTEN 3. TO ADJUST THE STRAPS. TAKE HOLD TOP END STRAP, PULL TO TIGHTEN THE STRAP WHEN SECURED. 1. UNFASTENING THE STRAP- TAKE THE STRAP SECURELY IN HAND AND PUSH THE “PRESS”... -
Page 9: Maintenance Instructions
Stainless Steel Equipment Maintenance MAINTENANCE INSTRUCTIONS had time to oxidize or decompose. The preferred solvent is one that does not contain chlorine, such as acetone, methyl The unit requires regular maintenance and follow the alcohol, and mineral spirits. manufactures directions. EFFECTIVE CLEANING METHODS DISINFECTING AND CLEANING Commercial Cleaners - Many commercial cleaners... -
Page 10: Maintenance Record
Maintenance Record MAINTENANCE RECORD Date... -
Page 11: Training Record
Training Record TRAINING RECORD Date... -
Page 12: Warranty
PARTS AND SERVICE Information in this Manual is subject to change without notice Customer relations and product support are important and does not represent a commitment on the part of Mortech aspects of Mortech Manufacturing. Inc. Manufacturing. Inc. Mortech Manufacturing. Inc. assumes...
Need help?
Do you have a question about the 7002-MT Series and is the answer not in the manual?
Questions and answers