Using Automatic Redial; Using Caller Id - Motorola C650 - MANUEL 2 Manual

UG.C650.GSM.book Page 54 Tuesday, May 11, 2004 8:03 AM

Using Automatic Redial

When you receive a busy signal, your phone displays
.
To redial the phone number:
Press
N or
(+)
Your phone automatically redials the number. When the call goes
through, your phone rings or vibrates one time, displays
, and then connects the call.

Using Caller ID

Incoming Calls
Calling line identification (Caller ID) displays the phone
number for incoming calls in your phone's display.
The phone displays the caller's name (and picture, if
available) when the name is stored in your phonebook, or
when caller ID information is not available.
You can also set your phone to play a distinctive ringer ID and/or
light ID for specific entries stored in your phonebook. For more
information, see page 68.
Outgoing Calls
You can show or hide your phone number as an ID for the
calls that you make.
Find the Feature
54 - Calling Features
To
activate automatic redial
M >
>
>