Ending A Call; Answering A Call; Turning Off The Phone - Motorola C200 User Manual

Note: When network service is not available, no signal
level will be displayed on the screen.
Note: When connected to a network you do not have
access to, the signal strength will still show on the screen.
You can only make an emergency call.
Note: During a call, you can use the call options described
on page 30.

Ending a Call

( &
( EXIT )
When you finish a phone call, press or
(
to end the call and return to idle mode. Also press or
&
( EXIT ) if you want to drop a call after dialing.

Answering a Call

When your phone rings or vibrates, the screen will display
the name or the phone number of the caller.
Note: Network support dependent.
The name displayed depends on the data in the Phone
$ )
( OK ) or
Book. Press to answer a call.You can
also answer incoming calls by pressing any key.
Note: To change the answering mode, you must go to
Profiles
under the Audio Setting menu. See page 56 for
details.
( &
( EXIT ).
If you want to reject a call, press or

Turning Off the Phone

(
Press and hold to turn your phone off.
24