1. Lift yellow lever and discard cover. BOOKLET P/N 340062, DWG A14860, Rev. B, ECN 4226 The Ocenco M-20.2 EEBD is a belt worn or stored, compressed-oxygen, self-contained self- rescuer. The M-20.2 EEBD instantly provides breathable air, independent of the surrounding atmosphere, to a person escaping from any area of toxic gas or oxygen deficiency.
Page 3
2. Remove unit by pulling yellow neck strap 4. Fit yellow nose clip upwards. 5. Inhale through mouth and escape. To fit the neck strap, simply place the neck strap 3.Insert yellow mouthpiece over the head and pull upward on the o-ring to shorten the neck strap.
SERVICE LIFE CHANGE OVER The M-20.2 EEBD as a whole, may remain in When changing to a new M-20.2 EEBD from your service for fifteen years from the date of current M-20.2 EEBD proceed as follows: manufacture, provided the conditions of use are 1.
Page 5
18° to 24°C. The needle should read within the green zone. EEBD If belt worn or stored, the following visual The M-20.2 EEBD is designed to be belt worn or inspections should be conducted every two stored in a confined space environment. years: However, like all escape breathing devices it is not indestructible.
Page 6
9. Someone around you has difficulty breathing or passes out DO NOT sit on the M-20.2 EEBD. DO NOT drag the M-20.2 EEBD on the In the event of an emergency, always don your ground. M-20.2 EEBD before attempting to escape or DO NOT place the M-20.2 EEBD near heat...
Need help?
Do you have a question about the M-20.2 EEBD and is the answer not in the manual?
Questions and answers