Advertisement
Quick Links
INSTALLATION FILTER INSERT 100/125
VENT ONE 100/125
1.
Filter and filter ring
1. Filter material
2. Filter ring
3
To fix the accessory, the notch on the filter ring must be rotated to
the anti-rotation device on the vent. The accessory is now firmly in-
tegrated into the vent. The cover can be installed (see instructions).
2.
1
Insert the filter into the back of the filter ring as shown in fig. 1.
Notch
Anti-rotation-device
4
To replace the filter material, rotate the filter ring in the vent by
approx. 45 degrees to the left or right. With this you separate the
notch and the anti-rotation device. Now the filter can be easily
removed. The filter ring is reusable with a replacement filter.
2
Insert the filter frontally into the free connecting piece of the vent.
The filter ring can be inserted in any position in the vent.
WWW.TECANNO.DE
Advertisement
Related Manuals for tecanno VENT ONE 100
Summary of Contents for tecanno VENT ONE 100
- Page 1 INSTALLATION FILTER INSERT 100/125 VENT ONE 100/125 Filter and filter ring 1. Filter material Insert the filter into the back of the filter ring as shown in fig. 1. Insert the filter frontally into the free connecting piece of the vent.
- Page 2 Use your thumb and index finger to pull the prong out of the CAUTION: This may damage the filter ring and material. anchor. After removing all three prongs, pull the ring out of the vent connecting piece. The filter ring is reusable with a replacement filter. WWW.TECANNO.DE...
- Page 3 45 degrees to the left or right. With this you separate the firmly integrated into the vent. The cover can be installed (see notch and the anti-rotation device. Now the filter can be easily instructions.) removed. The filter ring is reusable with a replacement filter. WWW.TECANNO.DE...
Need help?
Do you have a question about the VENT ONE 100 and is the answer not in the manual?
Questions and answers