1. Manuals
  2. Brands
  3. E2S Manuals
  4. Security Sensors
  5. D2xH1-E
  6. Instruction manual

E2S D2xH1-E Instruction Manual

Heat detector
Hide thumbs

Advertisement

Table of Contents

INSTRUCTION MANUAL
D2xH1-E Heat Detector
Class I & II Div 2 ; UL521 ; CAN/ULC-S530
NEC / CEC / ATEX / IECEx / UKEx Zone 2, 22
1) Product Table
2) Warnings
WARNINGS:
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
POTENTIAL ELECTROSTATIC HAZARD – SEE INSTRUCTIO CLEAN ONLY WITH A DAMP CLOTH
AVERTISSEMENT:
NE PAS OUVRIR UN PRESENCE D'ATMOSPHERE EXPLOSIVE
DANGER POTENTIEL CHARGE ÉLECTROSTATIQUE - NETTOYER UNIQUEMENT AVEC UN CHIFFON HUMIDE
_______________________________________________________________________________________________________________________________
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D255-00-331-IS
Unit Type Code
32Vac @ 50/60Hz 5.0A
D2xH1-E
Issue 1
31-05-2024
Input Voltage
32Vdc / 1.0A Max
24Vdc /2.0A Max
Table 1: Electrical Ratings
www.e2s.com
Sheet 1 of 7
Max Power
1.25W Max
Tel: +44 (0)208 743 8880

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D2xH1-E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for E2S D2xH1-E

Summary of Contents for E2S D2xH1-E

  • Page 1 INSTRUCTION MANUAL D2xH1-E Heat Detector Class I & II Div 2 ; UL521 ; CAN/ULC-S530 NEC / CEC / ATEX / IECEx / UKEx Zone 2, 22 1) Product Table Unit Type Code Input Voltage Max Power 32Vac @ 50/60Hz 5.0A 1.25W Max...
  • Page 2 3) Marking & Rating Information ATEX / IECEx & UKEx Ratings The D2xH1-E Heat Detectors comply with the following standards for hazardous locations: Standards EN60079-0:2018/IEC60079-0:2017 (ed.7): Explosive Atmospheres - Equipment General Requirements. EN60079-1:2014/IEC60079-1:2014 (ed.7): Explosive Atmospheres - Equipment Protection by Flameproof Enclosures “d”.

  • Page 3: Location And Mounting

    5) Special Conditions of Use There are two heat detector orientations on the D2xH1-E unit. Special Condition for safe Use as stated on the Type Option : Detector orientation [d] :...

  • Page 4: Power Supply Selection

    See table 1 See section 12 4-off M4 Cover Screws Cover Max Power Dissipation: D2xH1-E 1.25W (Appropriate cable 10) Selection of Cable. Cable Glands, Blanking entry devices to be Elements & Adapters customer supplied) ATEx/IECEx & UKEx Installations: Fig. 2 Accessing the Enclosure.

  • Page 5: Cable Connections

    For EOL and Series device limitations and configurations see temperature of at least the values stated below: Section 12. Fitting can be requested by E2S at the order stage or added to the correct terminal blocks afterward. All For model D2xH1-E: devices must comply with the requirements stipulated in section 12.
  • Page 6  Any detector that has been involved in a fire or damaged must be replaced. _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D255-00-331-IS Issue 1 31-05-2024...
  • Page 7 Do not confuse these with units that were painted by the owners. _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D255-00-331-IS Issue 1 31-05-2024...
  • Page 8 SYSTEMS LTD. NEITHER THE WHOLE OR ANY EXTRACT MAY TITLE CHECKED DATE BE DISCLOSED, LOANED, COPIED OR USED FOR EUROPEAN SAFETY SYSTEMS LTD D2xH1-E Ex e HEAT DETECTOR WIRING / CIRCUIT MANUFACTURING OR TENDERING PURPOSES WITHOUT THEIR 31-05-2024 IMPRESS HOUSE B.ISARD WRITTEN CONSENT.

  • Page 9: Eu Declaration Of Conformity

    This Declaration is issued under the sole responsibility of the manufacturer. Desmond Gayler Document No.: DC-125_Issue_A Quality Assurance Manager Date and Place of Issue: London, 07/06/2024 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-125 Issue A Page 1 of 1 - QAF_252_Issue_5...
  • Page 10 This Declaration is issued under the sole responsibility of the manufacturer. Desmond Gayler Document No.: DC-133_Issue_A Quality Assurance Manager Date and Place of Issue: London, 07/06/2024 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-133 Issue A Page 1 of 1 - QAF_252_Issue_5...

Table of Contents