HSS Hire P05B Instruction Manual

THESE INSTRUCTIONS ARE FOR YOUR SAFETY. PLEASE READ THEM
CAREFULLY BEFORE USING THE APPLIANCE.
 CAUTION - Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.
 If the power lead is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
WARNING: In order to avoid overheating, do not cover the heater.
 The heater must not be located immediately below a socket- outlet.
 Do not use this heater in the immediate surroundings of a bath, a shower a
swimming pool or any other body of water.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and off
by the utility.
 Do not use the appliance for other than its intended use. For domestic indoor
use only.
 Place the appliance on a flat, stable, heat-resistant surface. Operating the
product in any other position could cause a hazard.
 Do not attempt to repair, disassemble or modify the appliance. There are no
user-serviceable parts inside.
CAUTION – if using an extension lead please ensure you do not exceed the
maximum rated running wattage/load of the extension lead.
Operating Instructions
1. Place the product in an upright position on a flat, steady, stable, heat-resistant
surface. Make sure there is nothing flammable or heat sensitive within 1 metre
(40 inches). Operating the product in any other position could cause a hazard.
2. Insert the plug into a suitable wall outlet after turning the thermostat switch
counter-clockwise to the minimum position and setting the Heater Switches and
CONVECTOR HEATER INSTRUCTION MANUAL
HSS2083 (P05B)