If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child.
- unscrew the light cover securing screw. - unhook the moving part as shown in the figure. If the light does not come on when the door is open, check that it is screwed into place properly. If it still does not light up, change the bulb.
¥ If your appliance is still not working properly after ¥ the plug is firmly in the wall socket and the mains making the above checks, contact the nearest power switch is on; service centre. ¥ there is an electricity supply (find out by plugging To obtain fast service, it is essential that when you in another appliance);...
Page 7
It is necessary that the niche is provided with a conduct of ventilation having the following dimensions: Depth 50 mm Width 540 mm PR01 Slide the appliance into the recess, pushing it against the wall on the handle side. D022...
Page 8
Apply covers (B) on joint cover lugs and into hinge holes. D726 Position the runners (A) at the top and bottom of the inside of the kitchen unit as shown in Fig. and mark the position of the external holes.