FS PLUS 340W • Observe all safety precautions (see page 11), seek the services of a qualified electrician, installation professional, or call ILUMINAR Lighting technicians for assistance. • DO NOT handle or touch the fixture while in use. •...
Physical Specifications MAIN PARTS OF LED FIXTURE: Bracket Aluminum Frame Driver Box Signal In & Out AC Input Hanging Ring DC Output Aluminum LED bar Folding design and compact package: Folding design and compact package: To replace single LED bar To replace driver box USER MANUAL | iLogic FS PLUS 340W...
Hardware & Accessories can be iLogic FS PLUS 340W hung from rope ratchets or can be mounted to a rack. Before you begin installation, check that you have all the necessary parts to begin. IN THE BOX iLogic FS PLUS 340W LED Driver Power Cable Signal Cable...
3. Once fixture is hanging with all LED bars installed, connect the power cable (blue tip) from the outlet to one side of the fixture. Controller Cable AC INPUT when handling your ILUMINAR CAUTION Fixture. The LED array should NOT come in contact with sharp objects. DO NOT touch diodes or apply direct force to the diodes as this can/will cause permanent damage.
Important Cautions & Warranty PREPARATION Transportation Improper transportation may harm or can even cause damage to LED lamp and power housing box). In case of obvious damage or incomplete scope of supply, please refer to your vendor immediately. Unboxing Please handle and unbox the LED lamp with care! Check the delivery contents for completeness first.
Page 10
Do NOT exceed 80% max load for breakers due to Inrush current in LED fixtures. Do NOT use sulfur vaporizers. GUARANTEE At ILUMINAR, we stand behind our products and our technology as well as our customers. All ILUMINAR LED fixtures are backed by our 5-Year Guarantee.
Need help?
Do you have a question about the iLogic FS Plus and is the answer not in the manual?
Questions and answers