Instructions for the use of the instructions booklet Notes which are important for your safety or for the proper functioning of the appliance Supplementary information regarding operation and practical applications of the appliance. Tips and notes concerning economical and environmentally sound use of the appliance...
¥ Insert the plug into the wall socket. The appliance Activate fast freeze by depressing the fast freeze can be activated/deactivated by pressing the switch (1). The pilot lamp (2) will then light up. The ON/OFF button (5).Turn the thermostat control SUPER function can be ended by pressing the knob (6) clockwise beyond position ÇOÈ...
¥ To quick-freeze foods when the appliance has not Do not use metallic instruments to remove been in use, switch on the freezer and let it run on the trays from the freezer. the quick-freeze setting for at least three hours...
Never use metal objects for cleaning your of newspaper and put it in a cool place. appliance as it may get damaged. ¥ Pull out the plug from the wall socket or turn the NEVER use detergents, abrasive powders, thermostat knob to the ÇOÈ setting.
The technical data is indicated in the rating plate on the left side inside the appliance. If there is a power failure when food is in the freezer, do not open the door of the freezer. The frozen food will not be affected if the power cut is of short duration (up to 23 hours) and the freezer is full, otherwise, it is recommended that the food should be used within a short time (a temperature increase of the frozen food shortens its safe storage period).
Positioning advisable to use the food stored as soon as ¥ Unpack the cabinet and check that it is in good possible. condition and free of any transport damage. ¥ Place the refrigerator away from direct sunlight and Electrical connection heat sources.
Depth of housing (2) 550 mm Width of housing (3) 560 mm D022 2. Apply joint the sealing strip as shown in figure. It is necessary that the niche is provided with a conduct of ventilation having the following dimensions: Depth...
Page 10
Snap vent grille (C) and hinge cover (D) supplied. into position. PR166 D727 7. Fix cover (C) on guide (A) until it clips into place. 4. Apply covers (B) on joint cover lugs and into hinge holes. PR 3 3/2 D013 8.
Page 11
9. Should the lining up of the furniture door be necessary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly. PR168 10. Fix cover (D) on guide (B) until it clips into place. PR167/1...
Need help?
Do you have a question about the JGI4428 and is the answer not in the manual?
Questions and answers