Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lockly Pro Manuals
  4. IP Access Controllers
  5. GUARD VISION INGRESS 303W
  6. Installation manual

Lockly Pro GUARD VISION INGRESS 303W Installation Manual

Smart access control + video doorbell
Hide thumbs Also See for GUARD VISION INGRESS 303W:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
VISION INGRESS 303W
SMART ACCESS CONTROL + VIDEO DOORBELL
For commercial use & professional installation
www.LocklyPRO.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the GUARD VISION INGRESS 303W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lockly Pro GUARD VISION INGRESS 303W

Summary of Contents for Lockly Pro GUARD VISION INGRESS 303W

  • Page 1 INSTALLATION GUIDE VISION INGRESS 303W SMART ACCESS CONTROL + VIDEO DOORBELL For commercial use & professional installation www.LocklyPRO.com...

  • Page 2: Section 1 - Product Overview

    Section 1 - Product Overview Full HD Video Camera Cable Outlet Reset Program Touchscreen Keypad 1 2 3 4 5 6 7 8 Welcome/Safe Mode RFID Card Reader Cable Outlet Fingerprint Reader Anti-Theft Alarm Speaker LED Indicator Doorbell PUSH Lock Control Port To ensure the device works properly, please make sure the wires are connected according to this diagram.

  • Page 3: Section 3- Installing The Mounting Plate

    Before installing, please refer to page P4-P8 of the user manual to select the suitable installation scenario. Connect the cables of the devices and accessories to Lockly Guard Vision Ingress according to the wiring diagram. Then, install Lockly Guard Vision Ingress by following Steps 3 &...
  • Page 4 Section 3- Installing the Mounting Plate (cont...) 3. If you need to pass through a cable on wire outlet (A), insert 4. Insert the plastic wall plugs on the drilled holes. Secure the mounting plate with screws. the cable first before installing the mounting plate on the wall. Note: The wiring cable should be not crossing or overlapping.
  • Page 5 Section 4 - Installing Lockly Guard Vision Ingress 1. Align Vision Ingress from the top of the mounting plate 2. Use the provided allen key to tighten the screw at the bottom by turning it clockwise. then insert till it reaches the bottom of the plate. Ensure Vision Ingress and video camera are completely tucked.
  • Page 6 TOTAL ACCESS SOLUTION We’re here to help! prosales@lockly.com locklypro.com/support © Copyright 2023 Lockly All rights reserved USA Patent NO. US 9,881,146 B2 | USA Patent NO. US 9,853,815 B2 | USA Patent NO. US 9,875,350 B2 | USA Patent NO. US 9,665,706 B2 | USA Patent NO. US 11,010,463 B2 | AU Patent NO.