Table of Contents
Advertisement
Quick Links
Instruction and parts manual
RTE (Rollerized Tine Extenders)
RTE-50
RTE-80
RTE-100
Original instructions
Manual no.:
Publishing date:
Table of contents
Introduction............................................................................. 2
Unintended usage .................................................................. 2
Residual risks.......................................................................... 2
Definitions ............................................................................... 3
Remark ..................................................................................... 3
(Quality) standards and directives ...................................... 3
Safety ....................................................................................... 4
Identification ........................................................................... 5
Maintenance schedule ......................................................... 5
Transportation ........................................................................ 6
Installation on forklift............................................................. 6
Operation of the RTE.............................................................. 7
Technical specifications ....................................................... 8
Part list Assembly steel wheel............................................. 8
Part list Complete RTE ........................................................... 9
MA15062015-02ENG
21-02-2019
Language:
ENG
Revision:
02
Advertisement
Table of Contents
Related Manuals for Meijer RTE-50
Summary of Contents for Meijer RTE-50
-
Page 1: Table Of Contents
Instruction and parts manual RTE (Rollerized Tine Extenders) RTE-50 RTE-80 RTE-100 Original instructions Manual no.: MA15062015-02ENG Language: Publishing date: 21-02-2019 Revision: Table of contents Introduction................2 Unintended usage ..............2 Residual risks................2 Definitions ................3 Remark ..................3 (Quality) standards and directives ........3 Safety .................. -
Page 2: Introduction
Introduction The Rollerized Tine Extender (RTE) is a fork arm extension developed specifically for handling air cargo pallets. Rollerized Tine Extenders can be used by forklift trucks and can be used with existing fork lift forks. The RTE can be used in- and outdoors, in temperatures ranging between -25°C and 70°C. Unintended usage The use of the RTE for purposes other than those described in this manual is prohibited. -
Page 3: Definitions
Information in this manual, including but not limited to images and text, may not be reproduced without prior written permission of Meijer Handling Solutions B.V. The information in this manual is provided without any form of guarantee. Meijer Handling Solutions B.V. shall in no case be liable for injuries and damages resulting from use of this manual. -
Page 4: Safety
Safety Warning: Caution: Don’t use the RTE in temperatures lower then Fork length must be at least 60% of the labelled -25°C / -13°F or higher then 70°C / 158°F. length of the RTE (see type plate). Warning: The RPPF may only be used by licensed operators and not by minors! Warning: Don’t use the RTE for lifting people or animals. -
Page 5: Identification
Identification Type plate symbols Max capacity Maintenance schedule Description Every 100 Every 500 Every 1000 Every 2000 hours hours hours hours Check wheels bearings for suffient lubrication. If required lubricate. Check all wheels for excessive wear. Replace parts if necessary. Check complete RTE once a year or 2000 hours. -
Page 6: Transportation
Transportation Caution: Forks must be at least 60% inserted into the RTE’s. insert four hoisting eyes (M12) in the threaded holes on the locations indicated above. Attach hoisting straps to the hoisting eyes to lift it. Installation on forklift Put the steel axle back to secure the RTE on the forklift. Put the locking pin back in the end of the steel axle. -
Page 7: Operation Of The Rte
Operation of the RTE tilt The mast of the forklift must be tilted several degrees back- wards to ensure the load doesn’t roll off. Caution: Make sure at least half (50%) of the load is placed over the fork supported part of the RTE. To secure the load on the RTE on the front of each fork there are 2 locking mechanisms. -
Page 8: Technical Specifications
Technical specifications * Depending on specific model Capacity: See data on type plate Centre of gravity: See data on type plate Weight: See data on type plate Part list Assembly steel wheel Pos No Description Article Nº Total Qty PU Wheel M00010282 Ball bearing M00021210... -
Page 9: Part List Complete Rte
Part list Complete RTE Pos No Description Article Nº Total Qty Locknut M5 12300 M5 Spring-loaded locking pin 39660 4,5 Counter Sunk Socket Head Screw M5 07470 M5x16 Nord-Lock washer M8 37967.080.001 Retaining ring M00008797 Axle M00008798 Pallet stop RTE M00008802 Assembly steel wheel M00010280...
Need help?
Do you have a question about the RTE-50 and is the answer not in the manual?
Questions and answers