Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for aidacare A200S
Summary of Contents for aidacare A200S
- Page 1 A200S ALUMINIUM STANDING LIFTER USER MANUAL...
-
Page 2: Table Of Contents
9. Standing Lifter Operation 10. Standing Guide 11. Sling Compatibility 12. Care & Maintenance 13. Compliance Important: Do not use the Aidacare Aspire A200S Standing Lifter without having first read 14. Warranty & Service this manual. WARNING 15. Troubleshooting This product Features the UKCA mark, in compliance with Part II UK MDR 2002 16. -
Page 3: Symbols Used In This Manual
This mobile standing lifter offers a robust solution for in home care, institutional and aged care environments. The A200S Standing Lifter allows patients to be transferred from sitting to standing with comfort and safety. The compact T-shape yoke offers versatility in patient grip points and multiple sling hooks to meet various user and carer needs. -
Page 4: Safety Precautions & Warnings
5. INTENDED USE under direct drive from the electric actuator fitted to the lifter. The Aidacare Aspire A200S Standing Lifter has been designed to stand and Raising the boom can cause it to become stuck in an transfer human patients with the assistance of one carer or attendant. -
Page 5: Parts Glossary
6. PARTS GLOSSARY 7. ASSEMBLY 1. Unpack Remove all parts from carton. 2. Attach the mast Insert the mast into the base, ensuring the holes align and secure with base fastening lever bolt. 3. Apply thread locker / loctite a) Locate actuator mounting hardware. -
Page 6: Preliminary Checks
8000 lift cycles. At this time (2) on base of control unit. the lifter needs to be serviced for safety and to maintain applicable warranty. A full load test should be completed at least every 12 months by an Aidacare service technician. - Page 7 Emergency Lowering Charging the battery To activate emergency lowering The A200S Standing Lifter is supplied lift up red tab located on top of with a LINAK external wall mount actuator housing. charger and is compatible with standard Australian power outlets.
-
Page 8: Standing Guide
Charging Dos & Don’ts: Emergency Stop To engage the emergency stop press the red button located on the control ALWAYS unit until it sits flush and remains in position. • Charge the battery whenever possible, to maximise battery life. Allowing batteries to fully discharge can reduce the useful life of a battery. -
Page 9: Sling Compatibility
• The actuator shaft should only be wiped with a cloth. DO NOT lubricate. attached securely. Should you have any questions, contact Aidacare. AS A MINIMUM A FULL SERVICE SHOULD BE COMPLETED EVERY 6 MONTHS AND THE LOAD TEST EVERY 12 MONTHS TO MAINTAIN WARRANTY. -
Page 10: Compliance
LIFTER AND ELECTRONICS CUSTOMER’S EXPENSE – PLEASE CONTACT AIDACARE FOR A CURRENT LIST OF SERVICE CENTRE LOCATIONS. AIDACARE warrants its products to be free from defects in materials and workmanship under normal use and service and will within the period SPARE PARTS... -
Page 11: Product Specifications
16. PRODUCT SPECIFICATIONS PROBLEM POTENTIAL FAULT ACTION Product Code LSS390640 LSS390640-UK • Warning alarm • Battery is discharged • Recharge battery Safe Working Load (SWL) 200kg 31.5st can be heard in • Battery may be faulty • Replace battery control unit Base Length 1072mm 42"... -
Page 12: Recycling Instruction
Building 3A, 1 Moorebank Avenue, Moorebank NSW 2170 Australia 1300 133 120 | product@aidacare.com.au UK Representative: European Device Solutions Ltd Max. Load and Net Weight in kg, the rest of the measurements are in cm (unmarked tolerance +/ – 1cm) - Page 13 AIDACARE PTY LTD Building 3A, 1 Moorebank Avenue, Moorebank NSW 2170 Australia 1300 133 120 | aidacare.com.au AIDACARE LIMITED Arcadia House, Maritime Walk, Ocean Village, Southampton SO14 3TL United Kingdom 01622 541235 | aidacare.co.uk MADE IN PRC ABUM06.34 211223...
Need help?
Do you have a question about the A200S and is the answer not in the manual?
Questions and answers