AcuRite 46016 Instruction Manual

Set the Time
1
Turn the set knob on the back of the clock in either direction.
2
Install or Replace Batteries
AcuRite recommends high quality alkaline for the best product
performance. Heavy duty or rechargeable batteries are not
recommended.
Insert 1 x AA alkaline battery into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Install Battery
2
1 AA battery
Instruction Manual
Indoor Clock
1
Set the Time