Table of Contents
Advertisement
Quick Links
Clock Setup
1
Remove the Weather-Resistant Covers
Access the battery compartments by pulling or twisting off the weather-
resistant covers. Be careful not to damage the covers during removal.
Pull Off Cover
Set the Time
2
Turn the set knob on the back of the clock in either direction.
Turn Set Knob
to Set Time
Illuminated Indoor or
with Temperature & Humidity
Twist Off Cover
Instruction Manual
Outdoor Clock
Pull Off Cover
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AcuRite 75133M
Summary of Contents for AcuRite 75133M
- Page 1 Instruction Manual Illuminated Indoor or Outdoor Clock with Temperature & Humidity Clock Setup Remove the Weather-Resistant Covers Access the battery compartments by pulling or twisting off the weather- resistant covers. Be careful not to damage the covers during removal. Pull Off Cover Pull Off Cover Twist Off Cover Set the Time...
- Page 2 Install or Replace Batteries AcuRite recommends high quality alkaline or lithium* batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. *The clock movement requires a lithium battery in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use a lithium battery in the clock movement for temperatures below -4°F / -20°C.
- Page 3 ROTATE TO CALIBRATE +/- Placement for Maximum Accuracy AcuRite products are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product.
-
Page 4: Troubleshooting
Troubleshooting Problem Possible Solution • Make sure clock is placed out of direct sunlight and away from any heat sources or vents (see Placement Inaccurate temperature for Maximum Accuracy). or humidity • Make sure clock is positioned away from any sources of moisture. -
Page 5: Customer Support
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 AcuRite Visit us at www. - Page 8 Plan your day with confidence ™ www.AcuRite.com ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy- rights are the property of their respective owners. AcuRite uses patented technology.
Need help?
Do you have a question about the 75133M and is the answer not in the manual?
Questions and answers
Clock stopped working....changed battery, still not working. Is there something else I should do or does the clock have to be replaced?
If the AcuRite 75133M clock stops working after changing the battery, follow these steps:
1. Check Battery Type – Ensure you are using high-quality alkaline or lithium batteries. Avoid heavy-duty or rechargeable batteries.
2. Verify Battery Installation – Insert the batteries following the correct polarity (+/-) as shown in the battery compartment.
3. Use Lithium Batteries in Cold Conditions – If the temperature is below -4°F (-20°C), use a lithium battery instead of an alkaline one.
4. Secure Weather-Resistant Covers – Make sure the battery compartment covers are properly replaced to protect the clock from environmental damage.
5. Manually Reset the Time – Turn the set knob on the back of the clock to reset the time.
If the clock still does not work, try replacing the batteries with new ones or checking for any visible damage.
This answer is automatically generated