Table of Contents Introduction........................... Precautions Before Use....................... Few Words about Blood Pressure....................Product Description........................Install or Replace Batteries......................How to Use the Upper Arm Cuff....................A Few Su estion Before Measurement..................System Setting..........................How to Measure Blood Pressure....................Recalling Memory......................... How to Prevent a Malfunction....................
Introduction Please read this user manual thoroughly before using the blood pressure monitor. For specific information on your own blood pressure, contact your physician. Thank you for purchasing this blood pressure monitor. Precaution Before Use This remarkable instrument is ideal for people who fre- quently monitor their own blood pressure because it's easy to use.
Page 4
This device is not suitable for disease diagnoses, Pressure on the cuff can temporarily disable moni- urgent treatment, continuous monitoring during toring devices that are used at the same time on medical emergencies or operations. the same limb. Before using, should wash your hand. It is necessary to check whether the operation of If there is too much pressure or you feel uncomfort- the sphygmomanometer will have a long-term ef-...
Few Words about Please consult your physician to determine if your blood pressure accurately reflects your actual blood Blood Pressure pressure. Your blood pressure changes constantly. Blood pres- sure fluctuates from day to day and minute to minute Blood pressure is the force exerted on the walls of your according to your body's needs.
Page 6
Factors that May Cause the Blood Pressure to Fluctuate: Exercise Taking a bath Breathing Eating Mental stress Worries Talking Smoking, etc. Environmental and Urination and bowel Drinking alcohol or temperature change movement Note: One or two readings will not provide a true indication of your normal blood pressure. It is very important to take regular, daily measurements and to keep accurate records.
Page 7
Consult Your Physician to Determine Your Normal Blood Pressure Please refer to the diagram below (Picture-02) Diastolic blood pressure (mmHg) Severe hypertension Moderate hypertension Mild hypertension High normal value Normal blood pressure Optimal blood Systolic blood pressure pressure (mmHg) (target value) 130 140 160 180 Picture-02...
Page 8
Blood Pressure Value WHO Grids in Device WHO Classification DIA <80 & SYS <120 Optimal blood pressure DIA <85 & SYS <130 Normal blood pressure DIA <90 & SYS <140 High normal value DIA <100 & SYS < 160 Mild hypertension DIA <110 &...
Product Description Cuff Connector Port Set Button Start/Stop Button Memory Button Air Tube Upper Arm Cuff LCD Display Type-C Power Port Air Plug Artery Mark Battery Compartment Speaker Picture-03...
Page 10
The Symbols on the LCD Display Systolic Blood Pressure Diastolic Blood Pressure Pulse (beats/min) Average Value Symbol Irregular Heart Beat Symbol Memory Battery Low Symbol Speaker Symbol Blood Pressure Unit Users 1 Users 2 WHO Bars Date & Time Heartbeat Symbol (Flashes During Measurement) Alarm Symbol Picture-04...
Install or Replace Environment Protection – Waste electrical products should not disposed of with house- Batteries hold waste. Please recycle where facilities ex- ist. Check with your local authority or retailer for recycling advice. When the low battery symbol appears on the dis- How to Use the Upper play or nothing is display while inflation during mea- surement, you should replace with new batteries.
Page 12
Tighten the free end of the cuff and close the cuff with the closer. There should be little free space between the arm and the cuff as this would influence the result. Cloth- ing must not restrict the arm. You should be able to fit 2 fingers between your arm and the cuff.
A Few Su estions Before Measurement Avoid eating, smoking, and exercising for at least Upper arm is not 30 minutes before taking a measurement. Also rest covered or pressed by gusset for at least 15 minutes before taking a reading. Stress raises blood pressure.
System Setting Setting Month/Date: Initial Month/Date is 1/01, when the Month display is flashing, press the MEM button, the month will in- Press the SET button and hold it for more than 3 SEC- crease by 1, press SET button to confirm. Set the date ONDS.
Page 15
Setting Voice: Please press MEM button to set the hour and do the same for minutes. Now you finish setting the alarm 1. And now you can do the same to set the alarm 2 and 3. Important! To allow the alarm play sound, Speaker Function MUST be turned on.
How to Measure Blood When the monitor detects an irregular rhythm that varies by less than 25% from the average rhythm two or Pressure more times during the measurement, the Irregular Heart- beat Symbol will appear on the display with the measurement values, we recommend you consult your physician.
Maintenance and Recalling Memory Repair Press “MEM” button to turn on the device, and it will display the average the value of last 3 measure- Do not wash or immerse the unit in water, use a soft ments. and dry cloth to clean it. Press “MEM”...
Package Contents Maximum mean error within ±5 mmHg NIBP Accuracy: Maximum standard deviation within 1 × Blood Pressure Monitor 8 mmHg 1 × Cuff Pulse Rate Accuracy: Within ±5% of reading 4 x AA Batteries Inflation: Electric pump inflation 1 x Type-C USB Cable Deflation: Pressure release value 1 x Storage Bag...
Symbols Information Type BF applied part Refer to instruction manual Please dispose of the device / battery / packing Attention and read before use in accordance with the legal obligation in your area. Specifies number Degrees of protection provided by enclosures Troubleshooting If you have trouble while using the unit, please check the following points first.
The ABP-2005-1 Blood Pressure Monitor is intended for use in an electromagnetic environment in which radiat- ed RF disturbances are controlled. The customer or the user of the ABP-2005-1 Blood Pressure Monitor can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF com- munications equipment (transmitters) and the ABP-2005-1 Blood Pressure Monitor as recommended below, ac- cording to the maximum output power of the communications equipment.
Page 21
Recommended separation distances between portable and mobile RF communications equipment and the ABP-2005-1 Blood Pressure Monitor. Separation distance according to frequency of transmitter (m) Rated maximum 150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz...
Page 22
Guidance and manufacturer’s declaration–electromagnetic emission The ABP-2005-1 Blood Pressure Monitor is intended for use in the electromagnetic environment specified be- low. The customer or the user of the device should assure that it is used in such an environment. Emission test...
Page 23
Guidance and manufacture’s declaration–electromagnetic immunity The ABP-2005-1 Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Compliance Electromagnetic...
Page 24
IEC61000-4-8 environment. Portable and mobile RF communications equip- ment should be used no closer to any part of the ABP-2005-1 Blood Pressure Monitor, in- cluding cables, than the recommended sepa- 3 Vrms 3 Vrms ration distance calculated from the equation...
Page 25
(including peripherals such as antenna cables and external antennas) should be used no closer than 30cm (12 inches) to any part of the ABP-2005-1 Blood Pressure Monitor, in- cluding cables specified by the manufacturer). Where P is the maximum output power rating...
Page 26
If the measured field strength in the location in which the ABP-2005-1 Blood Pressure Monitor is used exceeds the applicable RF compliance level above, the SD1Ultrasonic Doppler should be observed to verify normal operation. If abnormal performance is ob- served, additional measures may be necessary, such as reorienting or relocating the ABP-2005-1 Blood Pressure Monitor.
Page 27
Customer Support If you have any questions or concerns about your product, please contact our helpful Customer Support Team.* Email: info@alcedohealth.com Toll-Free: (833)682-8655 www.AlcedoHealth.com Support Hours Monday-Friday 10:00 am – 4:00 pm EST Distributed by: Nature Major Inc. 300 Old Country Rd Suite GL11, Mineola, NY 11501 *Please have your order invoice and order ID ready before contacting Customer Support.
Need help?
Do you have a question about the ABP-2005-1 and is the answer not in the manual?
Questions and answers