Maintenance - Dell NOT21840 Setup And Specifications Manual

Table 37. POST behavior (continued)
Option
Warnings and Errors
Enable Adapter
Warnings
Fastboot
Extend BIOS POST Time Allows the user to configure the BIOS POST load time

Maintenance

Table 38. Maintenance
Option
Service Tag
Asset Tag
BIOS Recovery from
Hard Drive
Start Data Wipe
Description
Allows the user to configure in what circumstances would the system stop the boot process upon
encountering errors:
● Prompt on Warning Errors — System will wait for user input when errors or warnings are
detected.
● Continue on Warning — System will wait for user input only when errors are detected.
● Continue on Warning and Errors — System will not ask for user input even when errors or
warnings are detected.
Allows the user to configure the system to give an error message when lower power adapter is
detected. The controls are as follows:
● On
● Off
Allows the user to configure the speed of UEFI boot process:
● Minimal
● Thorough
● Auto
● 0 seconds
● 5 seconds
● 10 seconds
Description
Displays the service tag of your computer.
Allows the admin to add an Asset Tag. It is a string of 64 characters that are used by IT
administrator to uniquely identify a particular system. Once an asset tag is set, it cannot be
changed.
Allows you to enable or disable recovery from a corrupt BIOS from a copy stored on the hard
drive.
● ON - Enabled by default.
● OFF
The user also gets a check box that allows enabling automatic recovery of the BIOS without user
input.
Allows the user to setup an autowipe on the storage devices on the system upon a reboot.
The options are:
● ON
● OFF - Enabled by default.
System setup 35