Advertisement
Advertisement
Table of Contents
Related Manuals for Spypoint FORCE-48
Summary of Contents for Spypoint FORCE-48
- Page 1 FORCE-48 Quick Start Guide v1.1...
- Page 2 IN THE BOX INSTALLATION FORCE-48 STRAP NOTE Batteries sold separately. User Manual, software updates & FAQs available at: www.spypoint.com/support.
- Page 3 COMPONENTS No glow flash Screw-thread for standard 1⁄4”-20 Red LED indicator LCD screen Photo lens OK button Detection lens Switch ON/SETUP/OFF Cable lock hole Navigation buttons Slot for installation strap SD card slot Locking latch Battery compartment 12 V jack...
- Page 8 e away. s ready. h before ETUP"...
-
Page 9: Power Source
Power Source 8AA alkaline or lithium batteries You can use any combination of the above power sources with your FORCE-48. If multiple power sources are connected, the camera will use them in the following order: 12V, and then the AA. -
Page 10: Installing An Sd Card
FOR MAXIMUM PERFORMANCE ND WITHOUT LEAKING BATTERIES • Use new batteries. • Use ONLY alkaline or ONLY lithium batteries. • Do not mix new and old batteries. • Do not use rechargeable AA batteries, as their lower voltage may cause operating difficulties. INSTALLING AN SD CARD The camera was designed to operate with an SD card between 2 and 512 GB of memory. - Page 11 FORMAT YOUR SD CARD After inserting your SD card, you will need to navigate to the Format option in the settings. Use the onscreen prompts to format the SD Card. GENERAL SETTINGS SETUP 30 MP 01:35:20 Use the buttons to switch to the LCD display or to (00016/02121) change options, and press OK to select.
- Page 12 SETUP ADJUST THE SETTINGS FOR THE 3 MODES OF OPERATION PHOTO MODE Delay: Allows you to select the time elapsed before the camera can detect again and take the next photo. If you want to capture multiple photos, use a shorter delay. Once you have selected the delay, press OK.
-
Page 13: Video Mode
VIDEO MODE Delay: Allows you to select the time elapsed before the camera can detect again and take the next video. Quality: Allows you to choose between 480P and 720P. Once you have made your selection, press OK. Length*: Allows the user to choose the video length (10 to 60 s). Once you have made your selection, press OK. -
Page 14: Other Options
OTHER OPTIONS Night: Choose the BOOST option for maximum brightness at night, select OPTIMAL to reduce fuzziness at night, and MIN BLUR to minimize the blurriness of moving objects. Once you have made your selection, press OK. Name: Allows to give a name to your camera. About: Indicates the software version. -
Page 15: Operation
OPERATION Once the setup is complete, turn the button from SETUP to ON. You may also switch from SETUP to OFF and turn the device ON later. RED LIGHT ON THE FRONT OF THE CAMERA When the switch is in the SETUP position, the red light will flash to confirm a motion detection once you have adjusted your settings. -
Page 16: Installation
INSTALLATION Recommended height of installation: The camera must be installed at the height of the centre line of the animal’s body. Ideal setup for high-quality images and videos: The target animal should be 7.5 m from the camera to get a better line of sight. - Page 17 Scan for detailed instructions, LED light pattern descriptions, complete user manual & other helpful information : spypoint.com/force48-guide Need assistance? Just contact us! INTERNATIONAL CAN/US spypoint.info/en/support-2/ spypoint.com/support +49 (0) 36331-403333 1-888-779-7646 2-year limited warranty, visit spypoint.com/garantie for complete details. Made in China...
- Page 18 FORCE-48 More information available in the certifications guide...
Need help?
Do you have a question about the FORCE-48 and is the answer not in the manual?
Questions and answers