GE Color Choice 19002 Manual

NHL Model No. 19002LO
FOR INDOOR USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY
a)
INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar
sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric
shock it should not be played with or placed where small children can reach it.
h) Do not use this product for other than its intended use.
i) Do not hang ornaments or other objects from cord, wire, or light string.
j) Do not close doors or windows on the product or extension cords as this may damage the
wire insulation.
k) Do not cover the product with cloth, paper or any material not part of the product when in use.
l)This product is equipped with push-in type lamps. Do not twist lamps.
m) Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
n)
USE AND CARE INSTRUCTIONS
a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do
not place on live trees in which the needles are brown or break off easily. Keep the tree
holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
c) Before using or reusing, inspect product carefully. Discard any products that have cut,
damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures,
loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed, including
tree, branches, or bushes, to avoid any undue strain or stress on the product conductors,
connections, and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
Replace the lamp.
1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling cord.
2. Pull lamp and plastic base straight out of lampholder.
3. Replace lamp with only 3.3 Volt, 0.066 Watt,
LED type lamp (provided with product).
If the new lamp base does not fit in lampholder, follow the steps below step 3.
a) Remove the base of burned out lamp by straightening lamp leads and gently pull lamp out.
b) Thread leads of new lamp through holes in old base with one lead in each hole.
c) After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so
that the leads will touch the contacts inside the lampholder.
CAUTION:
1. Risk of fire. This product does not contain lamp shunts, which allow the product to operate
if one lamp burns out. Do not replace lamps with other than the spare lamps provided with
this product.
2. To reduce the risk of fire and electric shock: a) Do not install on trees having needles,
leaves or branch coverings of metal or materials which look like metal, and b) Do not
mount or support strings in a manner that can cut or damage wire insulation.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
BATTERY CAUTION:
• Non-rechargeable batteries are not to be recharged.
• Always purchase the correct size and grade of battery most suitable for the intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+and-).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Remove used batteries promptly.
• Exhausted batteries are to be removed from the product.
• Always replace the whole set of batteries at once time, taking care not to mix old and new
ones or batteries of different type, such as alkaline, standard (carbon-zinc) or rechargeable
(nickel cadmium) batteries.
• Replace only with (3) AA Alkaline batteries.
• AA batteries (not included)
• Do not dispose of batteries in fire. Batteries may explode or leak.
Built-in timer relights every evening all season (5 hours on, 19 hours off)
PLEASE READ USE AND CARE INSTRUCTIONS ATTACHED BEFORE TURNING THE
LIGHTS ON.
Once the lights are lit, they will remain lit for 5 hours. At the end of 5 hours the lights will
automatically shut off.
The lights will automatically turn on the next evening at the same time.
This process will repeat throughout the entire holiday season until you turn the lights to the
OFF position.
Try Me Batteries included:
WARNING
• INGESTION HAZARD: This product contains a button cell or
coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal
Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to
be swallowed or inserted inside any part of the body.
a) "Remove and immediately recycle or dispose of used batteries according to
local regulations and keep away from children. Do NOT dispose of batteries in
household trash or incinerate."
b) "Even used batteries may cause severe injury or death."
c) "Call a local poison control center for treatment information."
d) Use only LR44H.
e) 1.5 voltage.
f) "Non-rechargeable batteries are not to be recharged."
g) "Do not force discharge, recharge, disassemble, heat above (manufacturer's
specified temperature rating 60℃/140℉) or incinerate. Doing so may result in
injury due to venting, leakage or explosion resulting in chemical burns."
This product contains non-replaceable batteries.
This symbol marked on the product indicates "Warning: contains coin battery".
For questions and /or assistance, call customer service at 1-877-398-7337
or visit us on the web at www.geholidaylighting.com
© 2024 Nicolas Holiday Ltd.
246 Spring Hill Road, Unit B, Trumbull CT 06611
Suite 2706 Skyline Tower, 39 Wang Kwong Road, Kowloon Bay, Kowloon, Hong Kong
All rights reserved.
GE is a trademark of General Electric Company and is under license by Nicolas Holiday Ltd.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
If the product 1. The product is not turned on.
does not light 2. Batteries assembled incorrectly.
3. Low power or dead batteries.
FP-24 PRINTED IN CHINA
CORRECTIVE ACTION
1. Push button.
2. Follow battery installation
procedure.
3. Replace with new batteries.