Using Note Trigger (Module Only) - Korg wavestate Owner's Manual

Selecting and Playing Sounds

Using Note Trigger (module only)

Note Trigger lets you play sounds using the 1-16 buttons as an alternative keyboard—convenient if you don't have a
full keyboard connected. Note Trigger is only available on the wavestate module.
To use Note Trigger:
1. Hold SHIFT and press
The Note Trigger page appears:
Buttons 1-13 illuminate to create a keyboard pattern from C to C, with dimmed lights showing the white keys.
2. To play notes, press buttons 1-13.
3. To change the octave, use buttons 15 (down) and 16 (up), or edit the Octave parameter on the display.
4. To set the velocity of the triggered notes, use the Velocity parameter.
5. To cancel Note Trigger, press either
While using Note Trigger, you can use almost all of the instrument as you would normally. There are a few exceptions:
• When selecting Performances, Programs, Wave Sequences, etc., the 1-16 buttons continue to function as Note
Triggers, and so they are not available for selecting Categories.
• Entering a Wave Sequence editing page cancels Note Trigger, since the 1-16 buttons need to be used for Step selec-
tion.
WSEQ STEPS.
SET LIST or WSEQ STEPS.
8