How To Change System Settings Using Alphasmart Manager; About The Startup Smartapplet - Alphasmart NEO User Manual

How t o Change System Set tings Using AlphaSmart Manager
About t he Startup SmartApplet
To find out how to
set the startup
SmartApplet right on
the NEO, see page 56.
NEO and NEO 2 by AlphaSmart
W
1. In AlphaSmart Manager, click the Settings tab.
2. Click System in the Settings List
A
3. Check the settings you want to change
to view all the settings.) Then, make changes to the settings as needed.
Note: When you change settings, notice that AlphaSmart Manager
automatically checks the System box on the left
box, changes you make to settings won't be sent to your NEO.
4. Click the Send List tab and verify that the settings you want to send
appear in the Send List Display.
5. Click Send. If you have set a send list password (see page 113), you must
enter the password and click OK.
The Startup SmartApplet that you choose in the System settings is the
SmartApplet that starts automatically when you turn on your NEO. To use
another SmartApplet, you must press the applets key and select a
SmartApplet from the list. AlphaWord Plus is the startup SmartApplet when
you first receive the NEO so you can begin writing right away.
You can choose only one SmartApplet as the startup program.
If you don't select a startup SmartApplet, when you turn on a NEO, it goes to
the SmartApplets list, with the cursor next to the SmartApplet you were
working in when you turned the NEO off.
A
O R K I N G W I T H L P H A
Defining System Settings for the NEO
A .
B
B . (You might need to scroll down
S M
M A R T A N A G E R
. If you uncheck this
A
107