Related Manuals for NEO STEAM HAZE 500
Summary of Contents for NEO STEAM HAZE 500
- Page 1 STEAM HAZE 500 PROFESSIONAL OIL BASE HAZE USER MANUAL | MANUAL DE USUARIO PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE POR FAVOR LEA LAS INSTRUCCIONES ANTES DE USAR P. 1 Versión Español | Tecshow NEBULA PAR 162 II...
- Page 2 STEAM HAZE 500 PROFESSIONAL FOG MACHINE THE STEAM HAZE 500 is the best option for set designers and professionals who demand the highest visual demands for shows. With an average consumption of 0.8 milliliters per minute, Neo’s Steam Haze 500 comes built in a robust, ultra-resistant flightcase ready for transport.
- Page 3 Blue - Neutral (N) Brown - Live (L) Warning: This appliance must be earthed. Green and Yellow - Earthed (E) White - Neutral (N) Black - Live (L) Warning: This appliance must be earthed. P. 3 English Version | NEO STEAM HAZE 500...
- Page 4 Gravity of the particle of haze is similar to the air, so the haze can stay in the air longer. High-quality air compressor allows the hazer to be more resistant and quiet almost without maintenance problem. P. 4 English Version | NEO STEAM HAZE 500...
-
Page 5: Getting Ready
9. Use LCD display for operating control, or connect DMX controller for setting. 10. Short-range movement, please use the supplied stopper tightly sealed out of the nozzle, to prevent oil spill. Important: Never mix oil-based haze fluid and water-based fog fluid. P. 5 English Version | NEO STEAM HAZE 500... -
Page 6: Dmx Connector Pin Assignment
DMX CONNECTOR PIN ASSIGNMENT The machine provides a 3 or 5 pin XLR connector for DMX connection. The diagram below indicates pin assignment information. P. 6 English Version | NEO STEAM HAZE 500... -
Page 7: Functions Of The Buttons
MANUAL: Starting button of manual fogging. Press “Manual” (without releasing) to maximum fan speed fogging. Release “Manual” to recover previous status. This function can be started forcedly under any status. Set values are automatically saved. P. 7 English Version | NEO STEAM HAZE 500... -
Page 8: Operation
When executing timing fogging, can press “Hold” to switch to continuous fogging directly. • When executing timing fogging, can press “Manual” to switch to Manual fogging directly, this function can be started forcedly under any status. P. 8 English Version | NEO STEAM HAZE 500... - Page 9 “* “, and setting the menu like previous TimeSet timing fogging mode or continuous fogging mode. There is no operator action for two seconds, then automatically revert DMX Set to the previous status. Addr-xxx P. 9 English Version | NEO STEAM HAZE 500...
- Page 10 DMX console. • Upon receiving DMX signal, except Manual fogging function, all built-in functions are invalid. • DMX signals dismissed, machine recovers display control mode, and built- in functions are recovered. P. 10 English Version | NEO STEAM HAZE 500...
- Page 11 “Interval” value is still in the static state. When Haze is ON, the timing function starts, and the panel shows the setting value of “Duration” and “interval”, duration will follow the timing action to decreased the value by seconds, this process will always be cycled. P. 11 English Version | NEO STEAM HAZE 500...
-
Page 12: Troubleshooting
Leave it dry itself, then install it back. 7. Make sure all wires are well connected. 8. Clean the metal cover with dry cloth. 9. Please do not upside down the flight case when storage. P. 12 English Version | NEO STEAM HAZE 500... - Page 13 R emove filter cotton, clean or replace it ⑥ put the haze machine back and cover the upper cover THIS END UP Important: Never mix oil-based haze fluid and water-based fog fluid. P. 13 English Version | NEO STEAM HAZE 500...
-
Page 14: Product Specifications
PRODUCT SPECIFICATIONS * Voltageis preset at the factory and may not be changed. P. 14 English Version | NEO STEAM HAZE 500... - Page 15 n e o . a m p r o w e b . c o m /am progrou p /a mprog roup P. 15...
Need help?
Do you have a question about the STEAM HAZE 500 and is the answer not in the manual?
Questions and answers