ActionTec USB Bluetooth User Manual page 56

Personal Information Manager that stores the default business card.
Click the down-arrow in the PIM shortcut menu and select the PIM
to be used. On subsequent appearances of this dialog box, the PIM
selection option is not available.
• Change the Selected PIM
On the PIM Item Transfer properties page, "Received items" section,
there is a Business Cards shortcut menu. When a PIM was selected
during initial setup the selected item in this menu was set to the
same PIM. To change the PIM used for the default business card,
open this shortcut menu and select a new PIM.
: A new default business card must be selected from the database
Note
of the newly selected PIM.
• Choose a default business card
• In the Select a Bluetooth Business Card dialog box that appears
when "Always send the same business card" is selected, highlight
the card.
: Once a card is highlighted, if you "hover" the mouse pointer
Note
over that selection, a balloon appears with additional informa-
tion about that contact.
• Click OK to choose a highlighted business card and return to the
PIM Item Transfer Properties page. The chosen contact now
appears in, and is selected in, the "Business card requests" shortcut
menu.
If the "Always send the same business card" option is selected again,
and a different contact chosen, the properties page will display both
contacts in the shortcut menu.
: In addition to the default menu options, the shortcut menu can
Note
hold up to ten contact names.
5.6.10 PIM Synchronization
The PIM Synchronization service can be used by a remote device to
synchronize its Personal Information Manager (PIM) database with the PIM
database of this computer. Four data types are supported:
• Business Cards
• Calendar Items
47