Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ActionTec Manuals
  4. Adapter
  5. 802CI2
  6. User manuel

ActionTec 802CI2 User Manuel

Hide thumbs

Advertisement

Quick Links

Download this manual
802CI2
User Manuel

Advertisement

loading

Related Manuals for ActionTec 802CI2

Summary of Contents for ActionTec 802CI2

  • Page 1 802CI2 User Manuel...

  • Page 2: Table Of Contents

    Contents Contents Introduction Wireless LAN Basics Installation for Window 95 / 98 Troubleshooting Technical specifications of 802CI2...

  • Page 3: Introduction

    2. Introduction Thank you for purchasing your Wireless LAN, 802CI2 PC Card. This manual will assist you with the installation procedure. The package you have received should contain the following items: • 802CI2 PC Card • User manual • Diskette containing Wireless LAN Management utility and drivers Note: if anything is missing, please contact your vendor The diskette contains the drivers and the program;...

  • Page 4: Wireless Lan Basics

    3. Wireless LAN Basics Wireless LAN (Local Area Networks) systems offer a great number of advantages over a traditional, wired system. Wireless LANs (WLANs) are more flexible, easier to setup and manage and often more cost effective than their wired equivalence. Using radio frequency (RF) technology.

  • Page 5: Installation For Window

    The following section will assist you to installing wireless LAN Adapter successfully. You will first install software (driver) and then insert the 802CI2 wireless LAN card, and finally set the network properties to accommodate resource sharing and select the type of wireless network that you wish to install. The 802CI2 can be easily be installed and used, without bothering to connect cables for keeping your computer to use network resources, as in case of wired LAN.
  • Page 6 • Install the Access Point at first. AP is needed in case of Infrastructure network mode. • Install the software using the Installation Diskette. • Install the Wireless LAN Card (802CI2). • Install the network protocol(s) required to communicate on your network. Most likely you will need the...
  • Page 7 Restart the PC and Click on the Control Panel and then on PC Card. Check whether it has PCMCIA card in one of the sockets or not. If you find 802CI2 PC Card in one of the sockets, it means the card is detected properly.

  • Page 8: Troubleshooting

    Click on the Control Panel and then on PC Card. Check whether it has PCMCIA card in one of the sockets or not. If you have 802CI2 PC Card in one of the sockets, it means the card is detected properly.

  • Page 9: Technical Specifications Of 802Ci2

    7. Technical specifications of 802CI2 Hardware compatibility IBM-compatible computer with a PC Card Type II Driver support NDIS 3.1 Windows 95 Windows 98 Windows NT4 and higher Linux WinCE(x86, SH4, MIPS) Standards supported IEEE802.11 standard for Wireless LAN All major networking standards (including TCP/IP, IPX)
  • Page 10 Specific features Supported bit rates: 11 Mbps 5.5 Mbps 1 Mbps 2 Mbps Data encryption: 40 bit WEP Encryption, 128-bit key length optional Utility software: Link Config User setup & diagnostics tool Key Management: Automatic Dynamic Key Allocation (ADKA) through public key Physical Dimensions Extended type-II PC Card 110 x 54 x 6 mm Weight...
  • Page 11 The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Actiontec Electronics, Inc may void the user’s authority to operate the equipment. Declaration of conformity for products marked with the FCC logo – United States only This device complies with Part 15 of the FCC Rules.