Table of Contents
Advertisement
• Once a connection has been authorized, an additional visual and/or
audio notification may appear (if enabled). This notification is for
information only to inform the operator that a connection has been
established.
After two devices are paired (step 1, above), the authentication
notification will no longer appear when a connection is attempted.
If "Always allow..." is enabled during the authorization process
(step 2, above), the authorization notification will not appear on future
connection attempts. Connection notification (step 3, above) only
happens if it has been enabled on the Notifications tab of the individual
service being accessed.
Service Access Notification
"Notifications" lets you associate a sound (Windows *.wav file) and/or a
visual indication with access attempts by remote devices. A different
notification sound can be associated with each local Bluetooth service.
Associate a Sound with Service Access
From the Bluetooth Configuration Panel, Local Services tab:
• Double-click a service name and then select the Notifications tab.
• Check the desired options; visual and sound may both be selected for a
single event.
• Choose a sound; click the Browse button and navigate to the sound file
(*.wav) to be used for notification. To preview the sound file, click the
play (>) button.
• Click OK to close the service's property dialog box.
5.6.2 Audio Gateway
The Bluetooth Audio Gateway service allows this computer to use a remote
Bluetooth device's microphone and speakers as this computer's input and
output devices.
For example, if this computer has voice recognition capabilities, a Bluetooth
headset might be used as the audio input device.
Hardware Requirements
• The Bluetooth radio on both this computer and the remote device must
support audio.
• The remote device handles both audio input and output for this
computer; therefore, this computer does not require a sound card,
microphone, or speakers.
40
Advertisement
Table of Contents
