4 Check the Enable box in the Daylight Savings field, if daylight savings
5 Click Next.
Setup Wizard -
Connection Type
applies to your area.
The Connection Type screen allows you to set up the Router for the type
of Internet connection you have. Before setting up your connection type,
have your account information from your ISP ready.
Figure 18 Connection Type Screen
Select a DSL mode from the following:
PPPoE — PPP over Ethernet, providing routing for multiple PCs, see
■
page 32
PPPoA — PPP over ATM, providing routing for multiple PCs, see
■
page 33
Bridge Mode (for a single PC) — RFC1483 Bridged Mode, for single
■
PCs only, see
page 34
Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs,
■
see
page 34
Dynamic/Fixed IP in 1483 Bridge Mode (for multiple PCs), see
■
and click Next.
For further information on selecting a mode see
page
54.
Accessing the Setup Wizard
"Internet Settings"
31
page 35
on