Download Print this page

Running The Setup Wizard - 3Com OfficeConnect 3CRWER100-75 Installation Manual

Wireless 54 mbps/108 mbps 11g cable/dsl router
Hide thumbs Also See for OfficeConnect 3CRWER100-75:

Advertisement

4. PPTP (DSL or Cable)

4. RUNNING THE SETUP WIZARD

1. If you haven't already done so, restart your computer.
2. Launch your web browser and attempt to contact the Router by typing
3. Login using the default password admin. The Wizard will attempt to
4. Where possible, the Wizard will recommend settings for most parameters.
5. 3Com recommends that you leave the LAN IP address for the router at the
6. When the DHCP Server Settings page is displayed, make sure that the
Connecting to the
When the Wizard has completed, attempt to browse to an Internet web site,
Internet
such as www.3com.com. If you can successfully access this site, then your
computer, Router and Cable/DSL modem have been correctly configured.
Refer to the Problem Solving section if you cannot make contact with the
Router or the Internet.
PPTP is only used by some European providers. If the installation instruc-
tions that accompany your modem ask you to setup a dialup connection
using a PPTP VPN tunnel then select this option. Note that when you
install the Router, you will not need to use the dialup VPN on your PC
anymore. To configure the Router you will need to know the following:
Username, Password, Service Name (if required by your ISP), and VPN
Server address (usually your modem).
You will be asked for the IP Allocation Mode when you run the Setup
Wizard.
the following URL in the location bar: http://192.168.1.1.
If you can access the Login page, then your computer has correctly
received an IP address from the Router.
launch automatically, but if it fails, select the Wizard tab and click on the
Wizard button.
However, there are some settings which you must provide. Most of these
will have been provided to you by your ISP when you set the account up.
factory set default address of 192.168.1.1. However, if you should choose
to hange it; make a note of the new address:
Router's LAN IP Address
Enable the DHCP Server with the following settings option is selected.
Running the Setup Wizard
_______._______._______._______
9
GB

Advertisement

loading