Related Manuals for SW-Motech BC.WPB.00.022.32400
Summary of Contents for SW-Motech BC.WPB.00.022.32400
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.WPB.00.022.32400 beinhaltet • contains • contient • contiene • contiene TRT.00.475.32400/B BC.WPB.00.022.11000...
-
Page 2: Safety Warning Symbol
~ 0.5 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 ø 6.4; DIN 125 Ø 12 / Ø 6.4 / h 70 M5 x 20; ISO 7380 SC.ST.06.100.01.912.088 US.ST.064.01.125 DB.ST.0120.0064.0700.01 SC.ST.05.020.02.7380.109 TRT.22.995.002.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Tightening the sleeve nuts (3) too tightly can damage the tank ring. WARNING: Use a liquid threadlocker! × Tighten the sleeve nuts (3) as specified. × 2 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the original screws from the attachment points shown. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 WARNING: Use a liquid threadlocker! Tighten the screws according to the manufacturer's instructions. 8 Nm × × × 4 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.WPB.00.022.32400 and is the answer not in the manual?
Questions and answers