Page 1
Please read carefully before installing or operating this unit...
Page 2
High Performance Power Amplifier Remote Subwoofer Level Control MOSFET PSU Transistors Proper system planning is the best way to maximize your ampli er performance. By Fully Regulated PWM Power Supply planning your installation carefully you can Low Pass Crossover avoid situations where the performance of 200mV - 6V Low Level Input the reliability of your system is compromised.
Page 3
Symptom Possible cause Action to take Internal crossover not set Reset crossover referring to the properly for speaker multi-cross crossover con guration section of this manual Distorted Output Speakers are blown Check system with known (Cont'd) working speakers and repair or replace as needed Poor Bass Response Speakers wired wrong...
Page 4
Symptom No Output Possible Cause Action To Take low or no remote turn-on Check remote turn-on voltage input output at ampli er and correct as SYSTEM 1 - 2 AMPLIFIER LINKED TO 1 CHANNEL needed Fuse blown Check power wire integrity and reversed polarity, repair as needed and replace fuse Power wires not connected...
Page 5
SYSTEM 2 - 2 SPEAKER MODE SYSTEM 3 - 1 SPEAKER MODE...
Need help?
Do you have a question about the SLC-X3050.1D and is the answer not in the manual?
Questions and answers