Miele W 1926 WASHING MACHINE Operating Instructions Manual page 42

Programmable functions
To check if the function has
been stored:
^ Perform Steps 1 to 4.
If the "Rinse 1-2" lamp lights up, the
programmable function is active.
^ Press the "ON/OFF" button. This fin-
ishes the check of the programmable
function.
If, after Step 2, the selector switch is
accidentally turned to a setting
other than one of the three shown:
– If the "Rinse 1-2" indicator does
not light up - no function was
activated
– If the "Rinse 1-2" indicator lights
up - proceed as in "Deleting the
additional functions".
Exception: the "Rinse 1-2" indicator
lamp will light up if the switch is set
to "COTTONS 190°F".
42
Deleting the additional func-
tions:
Follow the same instructions given un-
der "To activate the additional func-
tions", steps 1 to 5.
When the "Rinse 1-2" lamp goes out;
^ Press "ON/OFF".
The additional function has now been
deleted.