Table of Contents
Advertisement
Any residual water left in the
machine from the factory test-
ing process can be flushed out
as follows:
^ Do not put any laundry in the ma-
chine.
^ Place 1/4 of the recommended
amount of detergent in compartment
j
.
^ Turn on the machine.
^ Press the "Rapid wash" button.
^ Turn the program selector to the
"COTTONS 140°F" program.
^ Any residual water will be flushed out
during the wash program.
INSTALLATION INSTRUCTIONS
Water hardness reminder
The amount of detergent needed to
wash clothes depends on various fac-
tors, including the water hardness in
your area. You can set the water hard-
ness dial in the detergent dispenser as
a reminder.
^ Turn the dial to the desired setting.
Use the tool supplied with the ma-
chine. It is located behind the deter-
gent drawer, on the left hand side
(see Cleaning and Care).
1 = soft, 4 = very hard water
35
Hide quick links:
Advertisement
Table of Contents
