Miele Touchtronic T 9820 Operating And Installation Instructions page 7

Items with damaged fillings (e.g.
pillows or jackets) should not be dried
in the dryer. The filling can cause a fire.
Keep the area around the air intake
(toekick) and adjacent surrounding
areas free from lint, dust and dirt.
The interior of the machine and
exhaust duct should be cleaned
periodically by qualified personnel.
Do not place items exposed to oils
in your dryer. Items contaminated
with oils may contribute to a chemical
reaction that could cause the laundry to
catch fire.
Danger of suffocation or
toxication Adequate ventilation is
essential, especially when another
appliance which also uses the room air
(e.g. gas, oil or coal fired heater,
continuous flow or other water heater) is
installed in the same or an adjacent
room. Allow sufficient room ventilation
by unlockable ventilation openings in
the wall.
Check with your building inspector for a
riskless use to avoid a low pressure of
4 Pa or more.
The dryer must only run if the moist
exhaust air is conducted outside
by an installed exhaust duct vent.
Provide sufficient venting in the room
where the dryer is installed, e.g. by
opening a window.
IMPORTANT SAFETY INSTRUCTIONS
or a damaged lint filter.
In the event of malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for electric
current.
This appliance is equipped with a cord
having an equipment-grounding
conductor and a grounding plug. The
plug must be plugged into an
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
conductor can result in the risk of
electric shock. Contact a qualified
electrician if you are in doubt as to
whether the appliance is properly
grounded.
the outlet, have a proper outlet installed
by a qualified electrician.
This dryer must not be used
without an exhaust hose, lint filter
GROUNDING INSTRUCTIONS
This appliance must be grounded.
Do not install or use a dryer with
visible damage.
Proper installation is the
responsibility of the installer.
WARNING – Improper connection
of the equipment grounding
Do not modify the plug provided
with the appliance; if it will not fit
7