Miele T 8623C Operating Instructions Manual page 17

E Select any Extra options / Delay
start
^ Select any extra options or delay start
by pressing the appropriate button
(see "Extra options" and "Delay start"
for more details).
F Start the programme
The indicator light for the Start/Stop
button will flash when a programme is
being selected. The flashing indicates
that a programme can be started.
^ Press the Start/Stop button.
The indicator light for the Start/Stop
button will now light up constantly.
Drying will appear in the display and
the time remaining will start counting
down.
With programmes with drying levels,
e.g. Machine iron , Hand iron etc. the
drying level reached will be shown in
the display later on.
Memory
Settings selected for a programme can
be stored in memory, so that they are
automatically selected when this
programme is chosen again. See
"Settings menu J".
How to dry correctly
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence: Cooling
down will appear in the display. The
programme will not finish until the
cooling down phase has been
completed.
There is no cooling down phase at the
end of the Woollens handcare, Silks
handcare and Smoothing programmes.
G Remove the laundry when the
programme has finished
Anti-crease (if selected) and Finished
will appear in the display to indicate
that the programme has finished. The
buzzer (if selected) will sound at
intervals.
^ Press the Door button to open the
drum door.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
If the dryer is switched on at the mains
and the door is opened, the drum
lighting will come on. It will go out a few
minutes later to save energy.
^ Switch the dryer off by pressing the
l-On/0-Off button.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (unless the dryer has been
connected for external drainage).
17