Installing And Removing The Card - Canon EOA 750D W Basic Instruction Manual

Installing and Removing the Card

The card (sold separately) can be an SD, SDHC, or SDXC memory
card. SDHC and SDXC memory cards with UHS-I can also be used.
The captured images are recorded onto the card.
Make sure the card's write-protect switch is set upward to
enable writing and erasing.
Installing the Card
Write-protect switch
Possible shots
The number of possible shots depends on the remaining capacity of the

card, image-recording quality, ISO speed, etc.
Setting [z1: Release shutter without card] to [Disable] will prevent

you from shooting without a card inserted.
Open the cover.
1
Slide the cover as shown by the

arrows to open it.
Insert the card.
2
As shown by the illustration, face

the card's label side toward you
and insert it until it clicks in place.
Close the cover.
3
Close the cover and slide it in the

direction shown by the arrows until it
snaps shut.
When you set the power switch to

<1>, the number of possible shots
will be displayed on the LCD monitor.
33