SW-A0441-HSI-002
3. Detailed Description
The interface specification between This product and a Host controller is described below.
3-1. Connection format
3-1-1. Physical connection
Host (Controller)
RTS
CTS
TxD
RxD
GND
3-1-1-1. Data transmission sequence from Host to Slave
Host (Controller)
RTS
CTS
TxD
RxD
1. The host checks that CTS is High, then starts a data transmission from TxD.
2. The host performs the data transmission of the number of required bytes, and ends a transmission.
* The host can do RTS to Low during the transmission for disable data transmission from a slave.
3-1-1-2. Data transmission sequence from Slave to Host
Host (Controller)
RTS
CTS
TxD
RxD
1. The slave checks that CTS is High, then starts a data transmission from TxD.
2. The slave performs the data transmission of the number of required bytes, and ends a transmission.
* The slave can do RTS to Low during the transmission for disable data transmission from a host.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of copyright.
Hardware Software Interface (HSI)
Slave (This product)
CTS
RTS
RxD
TxD
GND
→
←
→
←
→
←
→
←
Marantz America, Inc. 2007
All specifications might be subject to change without notice.
Page: 4 / 17
Document Version [1.00b]
(Serial setting <RS232C basic>)
Baud Rate
: 9600bps
Data Bits
: 8bit
Parity
: None
Stop bit
: 1bit
Handshaking
: (RTS/CTS)
Slave (This product)
CTS
RTS
RxD
TxD
Slave (This product)
CTS
RTS
RxD
TxD