Advertisement
Quick Links
KRB08 TWIN BIN WASTE SEPARATION SYSTEM INSTALLATION INSTRUCTIONS
1.
Position bin either on the bottom of the cupboard or on a shelf allowing 5mm clearance between cupboard door and front
of twin bin.
2.
Be sure to allow sufficient clearance for door hinges when the bin is extended.
3.
Secure in cupboard using four round head screws. As indicated (A) screw into slots on the inside of base at front and back
of unit.
If required, we suggest that you use "Medium Kitchen Tidy Bags" with your purchase.
To insert bags correctly, lift bins and tuck excess bag down around the sides and drop bins back into base
96 Stoddard Road, Mt Roskill, Auckland 1041
www.enko.nz
0508 365 674 sales@enko.nz
Advertisement
Related Manuals for Enko KRB08
Summary of Contents for Enko KRB08
- Page 1 KRB08 TWIN BIN WASTE SEPARATION SYSTEM INSTALLATION INSTRUCTIONS Position bin either on the bottom of the cupboard or on a shelf allowing 5mm clearance between cupboard door and front of twin bin. Be sure to allow sufficient clearance for door hinges when the bin is extended.
- Page 2 10. Be careful to thoroughly dry any areas of metal to avoid rust and damage. 11. Do not use the bin outside or expose it to the weather. 12. Do not place the waste bin near a heater or hot device. 96 Stoddard Road, Mt Roskill, Auckland 1041 www.enko.nz 0508 365 674 sales@enko.nz...
Need help?
Do you have a question about the KRB08 and is the answer not in the manual?
Questions and answers