Enko KRB13E Installation Manual

K R B 1 3 E EX C L U SI V E HO L E - I N - O NE B E N CH TO P B I N I N STA L L AT I O N G U I D E

Parts List:

•
1 Stainless Steel Rim
•
1 Bucket
•
1 Rubber Lid Support
•
1 Lid
•
1 Instruction Sheet

Instructions:

•
Choose your desired mounting position.
•
Ensure there are no obstructions eg pipes, shelves etc.
•
Mark and scribe a 270mm hole.
•
Cut hole and test fit stainless steel ring.
•
Use builders adhesive to hold the ring in place.
•
Slip in the bucket, then rubber lid support, then the lid.
If required you can replace the bucket supplied with your own larger bucket, placed directly under the hole.
Plastic liners can be used with the bucket supplied.
96 Stoddard Road, Mt Roskill, Auckland 1041 www.enko.nz 0508 35 674 sales@enko.nz