Download Print this page

Qlightec MTG60 Series Manual

Modular led signal tower light with built-in terminal

Advertisement

Quick Links

Modular LED signal tower light with built-in terminal
MTG60/ MTC60/ MTR60 Series
30
50
NON
65
WATERPROOF
Thank you for purchasing Qlight's products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
Cover
Shape
Parts Name
MTG60 cover
MTG60 cover
MTG60 cover
85dB 100dB
Model No
Color
MG60-CV
Ivory
MG60-CV-SV
Silver
MG60-CV-BK
Black
Weight
0.01kg
Material: ABS
Protection ratings with assemble: IP65
Product size: Ø60 X 14
0.01kg
0.01kg
1
(Units : mm)
Common Specifications
Ø60
Please scan the QR code for more
detailed product information.
www.qlight.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the MTG60 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Qlightec MTG60 Series

  • Page 1 Modular LED signal tower light with built-in terminal MTG60/ MTC60/ MTR60 Series 85dB 100dB WATERPROOF Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use. Precautions for Safety Failure to follow the instructions below may cause a loss of life or serious physical injury.
  • Page 2: Ordering Specifications

    Ordering Specifications Ø60 • Buzzer module (Units : mm) Specification Shape Parts Name Model No Color Volume(dB) Weight Common Specifications Voltage Current Ø60 MTG60-Standard MG60-BZ-24 Ivory DC24V 90mA Max.90dB 0.06kg buzzer module MTG60-High- volume buzzer MG60-HBZ-24 Ivory DC24V 90mA Max.100dB 0.06kg module •...
  • Page 3 Ordering Specifications • Cover integrated Lens option is available (Units : mm) Shape Specification Model No Color Weight Common Specifications Voltage Current • Material: PC • Protection ratings with assemble: IP65 • Product size: Ø60 X 62 Ø60 Ø60 Ø60 MGA60-R-24 MCA60-R-24 DC24V...
  • Page 4 Ordering Specifications • Base module(Pole mount type) (Units : mm) Specification Shape Parts Name Model No Color Weight Common Specifications Voltage Current • Material: ABS MTG60-Pole • Protection ratings with type base MG60-BS-DC Ivory DC24V 400mA 0.14kg assemble: IP65 module-DC •...
  • Page 5 Ordering Specifications • Base module(Self stand type) (Units : mm) Specification Shape Parts Name Model No Color Weight Common Specifications Voltage Current • Material: ABS MTG60-Self • Protection ratings with stand base MG60-MBS-DC Ivory DC24V 400mA 0.14kg assemble: IP65 module-DC •...
  • Page 6 Ordering Specifications • Base module(M12 CONNECTOR type ) (Units : mm) Specification Shape Parts Name Model No Color Weight Common Specifications Voltage Current • Material: ABS • Protection ratings with MTG60M12 assemble: IP65 CONNECTOR MG60-BS-DC-M12 Ivory DC24V 400mA 0.15kg • Product size: Ø60 X 119 type base module-DC...
  • Page 7 How to configure module Model No/ Shape Assembly step • • Assembly Step 1 •Choose from cover, buzzer module, and cover lens integrated module •Please refer to detailed module specification in order to find out model number MG60-BZ/MG60-HBZ/MG60-WBZ MG60-CV MGA60-R/MCA60-R/MRA60-R Assembly Step 2 •Select among MTG, MTC, LED module...
  • Page 8: Wiring Instructions

    Wiring Instructions ■ Wiring using external contact • In case of wiring with external contacts, refer to the wiring diagrams below according to your product’s type and voltage setting. 부저 미적용 시 • Wiring diagrams Wiring diagrams DC Steady/ AC Steady/ Flashing Flashing External contact...
  • Page 9 Wiring Instructions ■ Wiring using transistor • When using a transistor, please choose between the NPN or PNP type transistor which best matches the voltage and product type, then connect them correctly according to the wiring diagrams below. 부저 미적용 시 •...
  • Page 10 Wiring Instructions ■ Wiring diagrams(In case of M12 connector type model) • M12 connector module can be supplied DC type only. (It same goes for External contact/Transistor contact) • Please wire the product by referring below PIN-MAP. Wiring diagrams Wiring diagrams (PIN-MAP) DC Steady/ Flashing...
  • Page 11 Example of MTG60 module configuration • You can assemble the product through module combination by referring to the diagram below. • When a buzzer module (high volume buzzer module/waterproof buzzer module) is combined, only 4 LED modules can be assembled (W color module cannot be assembled). MTG60ML-24-4-RAGB-SV MTG60L-WBZ-110/220-3-RAG-LW18 MTG60L-HBZ-24-4-RAGB-M12...
  • Page 12 Example of MTC60 module configuration • You can assemble the product through module combination by referring to the diagram below. • When a buzzer module (high volume buzzer module/waterproof buzzer module) is combined, only 4 LED modules can be assembled (W color module cannot be assembled). MTC60ML-HBZ-24-4-RAGB MTCA60L-24-4-RAGB-SL18 MTC60L-WBZ-24-3-RAG-M12-SV...
  • Page 13 Example of MTR60 module configuration • You can assemble the product through module combination by referring to the diagram below. • When a buzzer module (high volume buzzer module/waterproof buzzer module) is combined, only 4 LED modules can be assembled (W color module cannot be assembled). MTRA60ML-110/220-3-RAG-BK MTR60L-24-5-RAGBW-QL18-BK MTR60L-HBZ-24-2-RG-M12-BK...
  • Page 14: Mounting Hole Specifications

    How to Change Lens Kit ※Cautions • Disassembling lens kits Lens modules are connected through ① cone-shaped contact point. In case Twist the upper lens kit in a the contact point is damaged, it may counter-wise direction so the cause a contact failure. “I”...
  • Page 15 Mounting Accessories (Sold Separately) • Please refer to the dimensions below for installation of mounting brackets. ■ MTG60 Self stand base module DC/ module AC Dimensions PCD30~40 Ø12 MTG60 360°/3-Ø5 HOLES PCD30~40 MTC60 360°/6-Ø5 HOLES MTR60 4-Ø4.5 HOLES Ø12 CABLE ENTRY 4-Ø4.5 HOLES TWS45 TWA45...
  • Page 16 Mounting Accessories (Sold Separately) ■ MTG60-Pole mount type module DC/ module AC Dimensions MTG60 MTC60 MTR60 Ø18 Ø18 Ø18 Ø18 M18x1.5 M18x1.5 THREAD THREAD 2-Ø8.5 HOLES 2-Ø8.5 HOLES 18mm SCREW & NUT LB18 4-Ø5 HOLES 4-Ø5 HOLES Ø18 Ø18 Ø28 Ø28 Ø18 Ø18...
  • Page 17 Product installation direction ■ Install the product in accordance with the manual. Otherwise rainwater or moisture may penetrate into the product. ㆍBEACON/SIGNALING LIGHT ※ For products with a protection rating of less than IPX4, please install it vertically. Power cord inlet part shall not be facing the sky. ㆍ...
  • Page 18 MEMO...
  • Page 19 MEMO...
  • Page 20 Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement. For your safety The newest product information is available on our website.(www.qlight.com) Please read the instruction manual attached to the product carefully before installation and use. Qlight Co., Ltd.