Advertisement
Advertisement
Table of Contents
Related Manuals for Aqara FP1E
Summary of Contents for Aqara FP1E
- Page 1 Presence Sensor FP1E User Manual...
-
Page 2: Product Introduction
1. Before activating the device, please make sure you have the Aqara Home app downloaded and Aqara hub installed. Aqara Home App 2. Power the Presence Sensor FP1E, press and hold the reset button for 5 seconds until the LED indicator starts blinking, and release it. The device will enter pairing mode. - Page 3 3. Open the Aqara Home app, tap "Home" and then tap "+" in the top-right corner to enter the "Add Device (Accessory)" page. Select "Presence Sensor FP1E" or scan the installation code on the device and add it according to instructions.
-
Page 4: Detection Range Setting
Ceiling-mounting: When the device is installed horizontally downward on a ceiling with a height of 2.8m, the detection area is approximately a circle with a radius of 4 meters below the device, and the maximum detection space area is approximately up to 50 m². 2.8m * The above detection range is theoretical under ideal laboratory conditions. - Page 5 Note: The distance displayed in the "Current Location" is the straight-line distance from the device to the point where the energy of the human body is the largest. It is not the actual horizontal distance between the human body and the device that is strictly and accurately calculated. There may be errors with the distance perceived by the user.
-
Page 6: Automation Configuration
Automation Configuration Users can simply go to the App "Automation" interface and click "+" in the upper-right corner to add Automation related to the device. - Page 7 Recommended Automation Configuration By referring to the following automation recommendations, you can start using the device immediately within one minute, complete smart home linkage, and experience the charm of Presence Sensor FP1E. 1. When "Presence", Then "turn on the light";...
-
Page 8: Button Configuration
Operating Humidity: 0 ~ 95% RH, no condensation Radar Maximum Output Power ≤ 20 dBm (Only applicable to the EU region) What is in the Box: Presence Sensor FP1E × 1, User Manual × 1, Sticker × 1, Magnetic Mount × 1. - Page 9 Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Presence Sensor FP1E, PS-S03D / PS-S03E] are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.aqara.com/DoC/...
- Page 10 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Manufacturer: Lumi United Technology Co., Ltd. Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China. Online Customer Service: [www.aqara.com/support](http://www.aqara.com/support) Email: support@aqara.com...
Need help?
Do you have a question about the FP1E and is the answer not in the manual?
Questions and answers