Getting Started; Package Contents; Definitions; Equipment Needed (Not Included) - TrackMan iO Installation Instructions Manual

GETTING STARTED

2

PACKAGE CONTENTS

Trackman iO box
1
Calibration board
2
Trackman iO with protective foil and mounting plate
3
4
Power cable (country specific)
5 Power adapter
Flashlight
6
4 pcs M6 12 mm screws for VESA 100x100 mount
7
(NOT included) plus 2 pcs spare screws
Tee
8
Tee marker
9
10 USB stick (contains safety and conformity
guide, intallation instructions and software)
3 pcs AAA Battery
11
12 Box contents and safety instructions
13 Ceiling bracket (attached to Trackman iO)

DEFINITIONS

LH: Left hand
RH: Right hand
Target point: A spot or line that indicates the
preferred aiming direction
TPS: Trackman Performance Studio (PC Software)
IN-0050
3
1
5
10
9
8
12
EQUIPMENT NEEDED
(NOT INCLUDED):
• Ladder
• Pen or pencil
• Portable drill with ceiling surface-specific drill bits
• 4 pcs 4 mm x 30 mm ceiling surface-specific
screws
• 4pcs 6mm x 35mm raw plugs (wall anchors)
• Blanket or towel
• Ethernet cable (minimum Cat6/shielded)
• 2 golf clubs or alignment sticks.
• Screwdriver (choose standard or Phillips based on
the screws you are using)
• Bubble level
If you are not mounting your Trackman iO directly to
the ceiling using the attached ceiling bracket, you will
require additional equipment:
• VESA mount (100x100, with rotary joint and
adjustable drop pole/bracket)
• P l umb line (or laser level, or heavy-duty tape
measure)
4
6
11
7
13
INSTALLATION INSTRUCTIONS | PAGE 3