Ninja BLAST BC151SM Series Owner's Manual
Ninja BLAST BC151SM Series Owner's Manual

Ninja BLAST BC151SM Series Owner's Manual

Portable blender

Advertisement

Quick Links

BLAST™ PORTABLE BLENDER
BC151SM Series | Owner's Guide
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death or substantial property damage
if the warning included with this symbol is ignored.
For household use only.
Indicates location to attach USB-C cord for charging unit.
When using electrical appliances, basic safety precautions should always be followed, including the following:
WARNING:
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions must always be followed,
including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.
1
Read all instructions prior to using the appliance and its accessories.
2
Use only a power supply with an extra low voltage corresponding to the marking on the bottom of the motor base.
3
ALWAYS exercise care when handling the BlastBlade Assembly. The blades are sharp, handle carefully. ONLY grasp the BlastBlade Assembly
by the motor base. Failure to use care when handling the BlastBlade Assembly will result in a risk of laceration.
4
Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp blades that can cause injury
if mishandled.
5
Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.
6
Before use, wash all parts that may contact food. Follow washing instructions covered in this Owner's Guide.
7
DO NOT blend hot liquids, effervescent, or carbonated liquids, as doing so may cause pressure buildup, resulting in risk of burns or other
injuries to the user.
8
DO NOT fill the blending vessel past the MAX FILL line.
9
Blades are sharp. Handle carefully. Care shall be taken when handling the sharp cutting blades, emptying the vessel, and during cleaning.
10 Keep hands, hair, and clothing out of the vessel when loading and operating. DO NOT put your hands inside the vessel or anywhere near
the BlastBlade Assembly. Blades can still activate when the sip lid is removed.
11 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can cause the vessel to shatter and potentially
result in personal injury and property damage.
12 To protect against the risk of fire from battery damage, DO NOT submerge the motor base in any form of liquid.
13 DO NOT store outdoors or allow the product to be submerged in liquid.
14 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
15 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
16 Before each use, inspect BlastBlade Assembly for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange
for replacement.
17 DO NOT attempt to sharpen blades.
18 DO NOT allow any part of the unit to contact hot surfaces, including stoves and other heating appliances.
19 ALWAYS use the appliance on a dry and level surface.
SG sharkninja.sg | MY sharkninja.my

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLAST BC151SM Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ninja BLAST BC151SM Series

  • Page 1 BLAST™ PORTABLE BLENDER BC151SM Series | Owner’s Guide IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY Read and review instructions for operation and use. Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if the warning included with this symbol is ignored.
  • Page 2: Important Safety Instructions

    32 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, turn OFF the Ninja Blast™ Portable Blender using the Power button and allow it to cool for approximately 15 minutes before using again.
  • Page 3: Using The Control Panel

    USING THE CONTROL PANEL PROGRAMS: 5 Open the sip lid to sip, or remove the lid to pour out blender outputs into another container. DO NOT remove vessel from motor base when filled. Empty vessel prior to removing from START/STOP BUTTON motor base.
  • Page 4: Troubleshooting Guide

    Use of parts and accessories that are not genuine Ninja components Please visit sharkninja.sg/apps/product-registration to register your new Ninja product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase, and model number along with your name and address.
  • Page 5: Register Your Purchase

    REGISTER YOUR PURCHASE SG sharkninja.sg/apps/product-registration MY sharkninja.my/apps/product-registration SG Ninja Kitchen Chefs MY Ninja Kitchen Chefs (MY) SG @ninjakitchensg | MY @ninjakitchenmy RECORD THIS INFORMATION TECHNICAL SPECIFICATIONS Model Number: ____________________ Voltage: 5V , 0.5A–3A Serial Number: _____________________ Date of Purchase: ___________________...

Table of Contents